lkml.org 
[lkml]   [2018]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: iio: dac: Add docs for AD5770R DAC
Date
Adding dt-bindings documentation for AD5770R DAC. The bindings follow the
standard SPI and fixed regulator bindings.

Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
---
.../devicetree/bindings/iio/dac/ad5770r.txt | 86 +++++++++++++++++++
MAINTAINERS | 7 ++
2 files changed, 93 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/dac/ad5770r.txt

diff --git a/Documentation/devicetree/bindings/iio/dac/ad5770r.txt b/Documentation/devicetree/bindings/iio/dac/ad5770r.txt
new file mode 100644
index 000000000000..bdd6ee4d5f2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ad5770r.txt
@@ -0,0 +1,86 @@
+Analog Devices AD5770R DAC device driver
+
+Required properties for the AD5770R:
+ - compatible: Must be "adi,ad5770r"
+ - reg: SPI chip select number for the device
+ - spi-max-frequency: Max SPI frequency to use (< 10000000, as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt)
+ - child nodes: Each child node represents one channel and has
+ the following required properties:
+ * num: This represents the channel num
+ * adi,range-microamp: Output range of the channel
+ The following ranges are supported:
+ * Channel 0:
+ * <0 300000> 0 mA to 300 mA
+ * <(-60000) 0> -60 to 0 mA
+ * <(-60000) 300000> -60 to 300 mA
+ * Channel 1:
+ * <0 140000> 0 to 140 mA
+ * <0 250000> 0 to 250 mA
+ * Channel 2:
+ * <0 55000> 0 to 55 mA
+ * <0 150000> 0 to 150 mA
+ * Channel 3 to Channel 5:
+ * <0 45000> 0 to 45 mA
+ * <0 100000> 0 to 100 mA
+
+Optional properties:
+
+- vref: Specify the voltage of the external reference used.
+ Available reference options are: 1.25 V or 2.5 V. If no
+ external reference declared then the device will use the
+ internal reference of 1.25 V.
+
+- reset-gpios: GPIO spec for the RESET pin. If specified, it will be
+ asserted during driver probe.
+
+AD5770R Example:
+
+ ad5770r@0 {
+ compatible = "ad5770r";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ vref-supply = <&vref>;
+
+ reset-gpios = <&gpio 22 0>;
+
+ channel@0 {
+ num = <0>;
+ adi,range-microamp = <0 300000>;
+ };
+
+ channel@1 {
+ num = <1>;
+ adi,range-microamp = <0 140000>;
+ };
+
+ channel@2 {
+ num = <2>;
+ adi,range-microamp = <0 55000>;
+ };
+
+ channel@3 {
+ num = <3>;
+ adi,range-microamp = <0 45000>;
+ };
+
+ channel@4 {
+ num = <4>;
+ adi,range-microamp = <0 45000>;
+ };
+
+ channel@5 {
+ num = <5>;
+ adi,range-microamp = <0 45000>;
+ };
+ };
+
+External reference example:
+
+ vref: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-supply";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ };
+
diff --git a/MAINTAINERS b/MAINTAINERS
index 6f7721d1634c..9c2626079592 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -756,6 +756,13 @@ M: Michael Hanselmann <linux-kernel@hansmi.ch>
S: Supported
F: drivers/macintosh/ams/

+ANALOG DEVICES INC AD5770R DRIVER
+M: Mircea Caprioru <mircea.caprioru@analog.com>
+L: linux-iio@vger.kernel.org
+W: http://ez.analog.com/community/linux-device-drivers
+S: Supported
+F: Documentation/devicetree/bindings/iio/dac/ad5770r.txt
+
ANALOG DEVICES INC AD9389B DRIVER
M: Hans Verkuil <hans.verkuil@cisco.com>
L: linux-media@vger.kernel.org
--
2.17.1
\
 
 \ /
  Last update: 2018-07-30 16:01    [W:0.052 / U:55.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site