lkml.org 
[lkml]   [2018]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 01/12] sched/core: uclamp: extend sched_setattr to support utilization clamping
On Mon, Jul 16, 2018 at 09:28:55AM +0100, Patrick Bellasi wrote:
> The SCHED_DEADLINE scheduling class provides an advanced and formal
> model to define tasks requirements which can be translated into proper
> decisions for both task placements and frequencies selections.
> Other classes have a more simplified model which is essentially based on
> the relatively simple concept of POSIX priorities.
>
> Such a simple priority based model however does not allow to exploit
> some of the most advanced features of the Linux scheduler like, for
> example, driving frequencies selection via the schedutil cpufreq
> governor. However, also for non SCHED_DEADLINE tasks, it's still
> interesting to define tasks properties which can be used to better
> support certain scheduler decisions.
>
> Utilization clamping aims at exposing to user-space a new set of
> per-task attributes which can be used to provide the scheduler with some
> hints about the expected/required utilization for a task.
> This will allow to implement a more advanced per-task frequency control
> mechanism which is not based just on a "passive" measured task
> utilization but on a more "active" approach. For example, it could be
> possible to boost interactive tasks, thus getting better performance, or
> cap background tasks, thus being more energy efficient.
> Ultimately, such a mechanism can be considered similar to the cpufreq's
> powersave, performance and userspace governor but with a much fine
> grained and per-task control.
>
> Let's introduce a new API to set utilization clamping values for a
> specified task by extending sched_setattr, a syscall which already
> allows to define task specific properties for different scheduling
> classes.
> Specifically, a new pair of attributes allows to specify a minimum and
> maximum utilization which the scheduler should consider for a task.
>
> Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: Tejun Heo <tj@kernel.org>
> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Cc: Vincent Guittot <vincent.guittot@linaro.org>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: Paul Turner <pjt@google.com>
> Cc: Todd Kjos <tkjos@google.com>
> Cc: Joel Fernandes <joelaf@google.com>
> Cc: Steve Muckle <smuckle@google.com>
> Cc: Juri Lelli <juri.lelli@redhat.com>
> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
> Cc: Morten Rasmussen <morten.rasmussen@arm.com>
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> ---
> include/linux/sched.h | 16 ++++++++
> include/uapi/linux/sched.h | 4 +-
> include/uapi/linux/sched/types.h | 64 +++++++++++++++++++++++++++-----
> init/Kconfig | 19 ++++++++++
> kernel/sched/core.c | 39 +++++++++++++++++++
> 5 files changed, 132 insertions(+), 10 deletions(-)
>
> diff --git a/include/linux/sched.h b/include/linux/sched.h
> index 43731fe51c97..fd8495723088 100644
> --- a/include/linux/sched.h
> +++ b/include/linux/sched.h
> @@ -279,6 +279,17 @@ struct vtime {
> u64 gtime;
> };
>
> +enum uclamp_id {
> + /* No utilization clamp group assigned */
> + UCLAMP_NONE = -1,
> +
> + UCLAMP_MIN = 0, /* Minimum utilization */
> + UCLAMP_MAX, /* Maximum utilization */
> +
> + /* Utilization clamping constraints count */
> + UCLAMP_CNT
> +};
> +
> struct sched_info {
> #ifdef CONFIG_SCHED_INFO
> /* Cumulative counters: */
> @@ -649,6 +660,11 @@ struct task_struct {
> #endif
> struct sched_dl_entity dl;
>
> +#ifdef CONFIG_UCLAMP_TASK
> + /* Utlization clamp values for this task */
> + int uclamp[UCLAMP_CNT];
> +#endif
> +
> #ifdef CONFIG_PREEMPT_NOTIFIERS
> /* List of struct preempt_notifier: */
> struct hlist_head preempt_notifiers;
> diff --git a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h
> index 22627f80063e..c27d6e81517b 100644
> --- a/include/uapi/linux/sched.h
> +++ b/include/uapi/linux/sched.h
> @@ -50,9 +50,11 @@
> #define SCHED_FLAG_RESET_ON_FORK 0x01
> #define SCHED_FLAG_RECLAIM 0x02
> #define SCHED_FLAG_DL_OVERRUN 0x04
> +#define SCHED_FLAG_UTIL_CLAMP 0x08
> #define SCHED_FLAG_ALL (SCHED_FLAG_RESET_ON_FORK | \
> SCHED_FLAG_RECLAIM | \
> - SCHED_FLAG_DL_OVERRUN)
> + SCHED_FLAG_DL_OVERRUN | \
> + SCHED_FLAG_UTIL_CLAMP)
>
> #endif /* _UAPI_LINUX_SCHED_H */
> diff --git a/include/uapi/linux/sched/types.h b/include/uapi/linux/sched/types.h
> index 10fbb8031930..7421cd25354d 100644
> --- a/include/uapi/linux/sched/types.h
> +++ b/include/uapi/linux/sched/types.h
> @@ -21,8 +21,33 @@ struct sched_param {
> * the tasks may be useful for a wide variety of application fields, e.g.,
> * multimedia, streaming, automation and control, and many others.
> *
> - * This variant (sched_attr) is meant at describing a so-called
> - * sporadic time-constrained task. In such model a task is specified by:
> + * This variant (sched_attr) allows to define additional attributes to
> + * improve the scheduler knowledge about task requirements.
> + *
> + * Scheduling Class Attributes
> + * ===========================
> + *
> + * A subset of sched_attr attributes specifies the
> + * scheduling policy and relative POSIX attributes:
> + *
> + * @size size of the structure, for fwd/bwd compat.
> + *
> + * @sched_policy task's scheduling policy
> + * @sched_nice task's nice value (SCHED_NORMAL/BATCH)
> + * @sched_priority task's static priority (SCHED_FIFO/RR)
> + *
> + * Certain more advanced scheduling features can be controlled by a
> + * predefined set of flags via the attribute:
> + *
> + * @sched_flags for customizing the scheduler behaviour
> + *
> + * Sporadic Time-Constrained Tasks Attributes
> + * ==========================================
> + *
> + * A subset of sched_attr attributes allows to describe a so-called
> + * sporadic time-constrained task.
> + *
> + * In such model a task is specified by:
> * - the activation period or minimum instance inter-arrival time;
> * - the maximum (or average, depending on the actual scheduling
> * discipline) computation time of all instances, a.k.a. runtime;
> @@ -34,14 +59,8 @@ struct sched_param {
> * than the runtime and must be completed by time instant t equal to
> * the instance activation time + the deadline.
> *
> - * This is reflected by the actual fields of the sched_attr structure:
> + * This is reflected by the following fields of the sched_attr structure:
> *
> - * @size size of the structure, for fwd/bwd compat.
> - *
> - * @sched_policy task's scheduling policy
> - * @sched_flags for customizing the scheduler behaviour
> - * @sched_nice task's nice value (SCHED_NORMAL/BATCH)
> - * @sched_priority task's static priority (SCHED_FIFO/RR)
> * @sched_deadline representative of the task's deadline
> * @sched_runtime representative of the task's runtime
> * @sched_period representative of the task's period
> @@ -53,6 +72,28 @@ struct sched_param {
> * As of now, the SCHED_DEADLINE policy (sched_dl scheduling class) is the
> * only user of this new interface. More information about the algorithm
> * available in the scheduling class file or in Documentation/.
> + *
> + * Task Utilization Attributes
> + * ===========================
> + *
> + * A subset of sched_attr attributes allows to specify the utilization which
> + * should be expected by a task. These attributes allows to inform the
> + * scheduler about the utilization boundaries within which is safe to schedule
> + * the task. These utilization boundaries are valuable information to support
> + * scheduler decisions on both task placement and frequencies selection.
> + *
> + * @sched_util_min represents the minimum utilization
> + * @sched_util_max represents the maximum utilization
> + *
> + * Utilization is a value in the range [0..SCHED_CAPACITY_SCALE] which
> + * represents the percentage of CPU time used by a task when running at the
> + * maximum frequency on the highest capacity CPU of the system. Thus, for
> + * example, a 20% utilization task is a task running for 2ms every 10ms.
> + *
> + * A task with a min utilization value bigger then 0 is more likely to be
> + * scheduled on a CPU which can provide that bandwidth.
> + * A task with a max utilization value smaller then 1024 is more likely to be
> + * scheduled on a CPU which do not provide more then the required bandwidth.
> */
> struct sched_attr {
> __u32 size;
> @@ -70,6 +111,11 @@ struct sched_attr {
> __u64 sched_runtime;
> __u64 sched_deadline;
> __u64 sched_period;
> +
> + /* Utilization hints */
> + __u32 sched_util_min;
> + __u32 sched_util_max;
> +
> };
>
> #endif /* _UAPI_LINUX_SCHED_TYPES_H */
> diff --git a/init/Kconfig b/init/Kconfig
> index 041f3a022122..1d45a6877d6f 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -583,6 +583,25 @@ config HAVE_UNSTABLE_SCHED_CLOCK
> config GENERIC_SCHED_CLOCK
> bool
>
> +menu "Scheduler features"
> +
> +config UCLAMP_TASK
> + bool "Enable utilization clamping for RT/FAIR tasks"
> + depends on CPU_FREQ_GOV_SCHEDUTIL

Does it make sense to depend on this? One could turn off schedutil and then
uclamp can't be used for any other purpose (big.LITTLE task placement etc)?

thanks,

- Joel

\
 
 \ /
  Last update: 2018-07-17 19:50    [W:0.320 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site