lkml.org 
[lkml]   [2018]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 07/12] sched/core: uclamp: enforce last task UCLAMP_MAX
Date
When a util_max clamped task sleeps, its clamp constraints are removed
from the CPU. However, the blocked utilization on that CPU can still be
higher than the max clamp value enforced while that task was running.
This max clamp removal when a CPU is going to be idle could thus allow
unwanted CPU frequency increases, right while the task is not running.

This can happen, for example, where there is another (smaller) task
running on a different CPU of the same frequency domain.
In this case, when we aggregates the utilization of all the CPUs in a
shared frequency domain, schedutil can still see the full non clamped
blocked utilization of all the CPUs and thus eventually increase the
frequency.

Let's fix this by using:

uclamp_cpu_put_id(UCLAMP_MAX)
uclamp_cpu_update(last_clamp_value)

to detect when a CPU has no more RUNNABLE clamped tasks and to flag this
condition. Thus, while a CPU is idle, we can still enforce the last used
clamp value for it.

To the contrary, we do not track any UCLAMP_MIN since, while a CPU is
idle, we don't want to enforce any minimum frequency
Indeed, we relay just on blocked load decay to smoothly reduce the
frequency.

Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Todd Kjos <tkjos@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-pm@vger.kernel.org
---
kernel/sched/core.c | 30 ++++++++++++++++++++++++++----
kernel/sched/sched.h | 2 ++
2 files changed, 28 insertions(+), 4 deletions(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index b2424eea7990..0cb6e0aa4faa 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -930,7 +930,8 @@ uclamp_group_find(int clamp_id, unsigned int clamp_value)
* For the specified clamp index, this method computes the new CPU utilization
* clamp to use until the next change on the set of RUNNABLE tasks on that CPU.
*/
-static inline void uclamp_cpu_update(struct rq *rq, int clamp_id)
+static inline void uclamp_cpu_update(struct rq *rq, int clamp_id,
+ unsigned int last_clamp_value)
{
struct uclamp_group *uc_grp = &rq->uclamp.group[clamp_id][0];
int max_value = UCLAMP_NONE;
@@ -948,6 +949,19 @@ static inline void uclamp_cpu_update(struct rq *rq, int clamp_id)
if (max_value >= SCHED_CAPACITY_SCALE)
break;
}
+
+ /*
+ * Just for the UCLAMP_MAX value, in case there are no RUNNABLE
+ * task, we keep the CPU clamped to the last task's clamp value.
+ * This avoids frequency spikes to MAX when one CPU, with an high
+ * blocked utilization, sleeps and another CPU, in the same frequency
+ * domain, do not see anymore the clamp on the first CPU.
+ */
+ if (clamp_id == UCLAMP_MAX && max_value == UCLAMP_NONE) {
+ rq->uclamp.flags |= UCLAMP_FLAG_IDLE;
+ max_value = last_clamp_value;
+ }
+
rq->uclamp.value[clamp_id] = max_value;
}

@@ -977,13 +991,21 @@ static inline void uclamp_cpu_get_id(struct task_struct *p,
uc_grp = &rq->uclamp.group[clamp_id][0];
uc_grp[group_id].tasks += 1;

+ /* Force clamp update on idle exit */
+ uc_cpu = &rq->uclamp;
+ clamp_value = p->uclamp[clamp_id].value;
+ if (unlikely(uc_cpu->flags & UCLAMP_FLAG_IDLE)) {
+ if (clamp_id == UCLAMP_MAX)
+ uc_cpu->flags &= ~UCLAMP_FLAG_IDLE;
+ uc_cpu->value[clamp_id] = clamp_value;
+ return;
+ }
+
/*
* If this is the new max utilization clamp value, then we can update
* straight away the CPU clamp value. Otherwise, the current CPU clamp
* value is still valid and we are done.
*/
- uc_cpu = &rq->uclamp;
- clamp_value = p->uclamp[clamp_id].value;
if (uc_cpu->value[clamp_id] < clamp_value)
uc_cpu->value[clamp_id] = clamp_value;
}
@@ -1028,7 +1050,7 @@ static inline void uclamp_cpu_put_id(struct task_struct *p,
uc_cpu = &rq->uclamp;
clamp_value = uc_grp[group_id].value;
if (clamp_value >= uc_cpu->value[clamp_id])
- uclamp_cpu_update(rq, clamp_id);
+ uclamp_cpu_update(rq, clamp_id, clamp_value);
}

/**
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 1207add36478..7e4f10c507b7 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -783,6 +783,8 @@ struct uclamp_group {
* values, i.e. no min/max clamping at all.
*/
struct uclamp_cpu {
+#define UCLAMP_FLAG_IDLE 0x01
+ int flags;
int value[UCLAMP_CNT];
struct uclamp_group group[UCLAMP_CNT][CONFIG_UCLAMP_GROUPS_COUNT + 1];
};
--
2.17.1
\
 
 \ /
  Last update: 2018-07-16 10:31    [W:0.291 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site