Messages in this thread | | | Date | Wed, 4 Apr 2018 12:31:21 +0200 | From | Greg KH <> | Subject | [GIT PULL] USB/PHY driver patches for 4.17-rc1 |
| |
The following changes since commit c698ca5278934c0ae32297a8725ced2e27585d7f:
Linux 4.16-rc6 (2018-03-18 17:48:42 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ tags/usb-4.17-rc1
for you to fetch changes up to 5267c5e09c25e2ee6242b37833a9bdf9d97f54a2:
Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870" (2018-03-29 18:37:28 +0200)
---------------------------------------------------------------- USB/PHY patches for 4.17-rc1
Here is the big set of USB and PHY driver patches for 4.17-rc1.
Lots of USB typeC work happened this round, with code moving from the staging directory into the "real" part of the kernel, as well as new infrastructure being added to be able to handle the different types of "roles" that typeC requires.
There is also the normal huge set of USB gadget controller and driver updates, along with XHCI changes, and a raft of other tiny fixes all over the USB tree. And the PHY driver updates are merged in here as well as they interacted with the USB drivers in some places.
All of these have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---------------------------------------------------------------- Adam Thomson (3): typec: tcpm: Add PD Rev 3.0 definitions to PD header typec: tcpm: Add ADO header for Alert message handling typec: tcpm: Add SDB header for Status message handling
Alban Bedel (1): usb: host: Remove the deprecated ATH79 USB host config options
Alex Hung (1): usb: clarify ACPI spec version and section number for _UPC & _PLD
Alexander Monakov (1): phy: berlin-usb: adjust USB_PHY_RX_CTRL init flags
Alexey Khoroshilov (1): phy: lpc18xx-usb-otg: error handling in lpc18xx_usb_otg_phy_power_on()
Amelie Delaunay (3): usb: dwc2: add support for host mode external vbus supply dt-bindings: phy: add support for STM32 USB PHY Controller (USBPHYC) phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)
Andy Shevchenko (19): USB: dwc2: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: gadget: bcm63xx: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: gadget: gr: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: gadget: pxa25x: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: gadget: pxa27x: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: chipidea: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: dwc2: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: musb: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: gadget: bcm63xx: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: gadget: gr: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: gadget: pxa25x: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: gadget: pxa27x: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: host: fhci: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: host: imx21: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: host: isp116x: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: host: whci: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: typec: Re-use DEFINE_SHOW_ATTRIBUTE() macro uwb: Re-use DEFINE_SHOW_ATTRIBUTE() macro USB: host: sl811: Re-use DEFINE_SHOW_ATTRIBUTE() macro
Ben Hutchings (1): usbip: Correct maximum value of CONFIG_USBIP_VHCI_HC_PORTS
Benjamin Herrenschmidt (1): usb/gadget: Add an EP dispose() callback for EP lifetime tracking
Benson Leung (1): USB: announce bcdDevice as well as idVendor, idProduct.
Chen-Yu Tsai (1): phy: allwinner: sun4i-usb: poll vbus changes on A23/A33 when driving VBUS
Chris Dickens (2): usb: gadget: composite: fix incorrect handling of OS desc requests usb: gadget: composite: remove duplicated code in OS desc handling
Chris Zhong (2): phy: rockchip-typec: force to USB2 if DP at 4 lanes mode phy: rockchip-typec: support DP phy switch
Chunfeng Yun (4): phy: phy-mtk-tphy: keep default value of mcu_bus_ck_gate_en phy: phy-mtk-tphy: add configurable parameters for slew rate calibrate dt-bindings: phy-mtk-tphy: add properties for U2 slew rate calibrate usb: skip phys initialization of shared hcd
Clemens Werther (1): USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
Colin Ian King (4): phy: tegra: remove redundant self assignment of 'map' USB: gadget: function: remove redundant initialization of 'tv_nexus' USB: wusbcore: remove redundant re-assignment to pointer 'dev' usb: dwc2: fix spelling mistake: "genereted" -> "generated"
Dan Carpenter (1): usb: xhci: Clean up error code in xhci_dbc_tty_register_device()
Daniel Gimpelevich (1): USB: misc: uss720: more vendor/product ID's
Dmitry Osipenko (1): usb: phy: tegra: Increase PHY clock stabilization timeout
Dov Levenglick (1): phy: fix structure documentation
Enric Balletbo i Serra (4): phy: rockchip-typec: deprecate some DT properties for various register fields. dt-bindings: phy-rockchip-typec: deprecate some register properties. dt-bindings: phy-rockchip-typec: move extcon property to be optional. phy: rockchip-typec: fall back to working in host-mode if extcon is missing.
Fabio Estevam (1): usb: phy: mxs: Staticize mxs_charger_secondary_detection()
Felipe Balbi (4): usb: dwc3: debugfs: Re-use DEFINE_SHOW_ATTRIBUTE() macro usb: dwc3: Makefile: fix link error on randconfig usb: gadget: udc: core: update usb_ep_queue() documentation usb: dwc3: gadget: never call ->complete() from ->ep_queue()
Gevorg Sahakyan (1): usb: dwc2: Remove version check in GSNPSID
Greg Kroah-Hartman (6): Merge 4.16-rc3 into usb-next Revert "usb: core: Add "quirks" parameter for usbcore" Merge branch 4.16-rc6 into usb-next Merge tag 'phy-for-4.17' of git://git.kernel.org/.../kishon/linux-phy into usb-next Merge tag 'usb-for-v4.17' of git://git.kernel.org/.../balbi/usb into usb-testing Merge tag 'usb-serial-4.17-rc1' of https://git.kernel.org/.../johan/usb-serial into usb-next
Grigor Tovmasyan (5): usb: dwc2: Delete unused functionality usb: dwc2: Fix interval type issue usb: dwc2: Add call_gadget() function call usb: dwc2: Add core state checking usb: dwc2: Make dwc2_force_mode() static
Gustavo A. R. Silva (2): usb: dwc2: gadget: Use true and false for boolean values USB: wusbcore: crypto: Remove VLA usage
Hans de Goede (7): usb: typec: tcpm: Set USB role switch to device mode when configured as such usb: typec: tcpm: Use new Type-C switch/mux and usb-role-switch functions xhci: Add Intel extended cap / otg phy mux handling usb: roles: Add Intel xHCI USB role switch driver usb: typec: driver for Pericom PI3USB30532 Type-C cross switch platform/x86: intel_cht_int33fe: Add device connections for the Type-C port extcon: axp288: Set USB role where necessary
Heikki Krogerus (5): usb: typec: Start using ERR_PTR drivers: base: Unified device connection lookup usb: typec: API for controlling USB Type-C Multiplexers usb: common: Small class for USB role switches usb: typec: Separate the definitions for data and power roles
Heinrich Schuchardt (2): usb: dwc3: ep0: remove redundant assignment usb: musb: gadget: misplaced out of bounds check
Himanshu Jha (1): usb: isp1760: Use kasprintf
Icenowy Zheng (1): phy: sun4i-usb: add support for R40 USB PHY
Jaejoong Kim (1): usb: gadget: udc: Use scnprintf() instead of snprintf()
Jianguo Sun (2): dt-bindings: add bindings doc for hi3798cv200 combphy phy: add combo phy driver for HiSilicon STB SoCs
Johan Hovold (5): USB: serial: option: reimplement interface masking USB: serial: option: drop redundant interface-class test USB: serial: option: use mass-storage class define USB: serial: cp210x: add ELDAT Easywave RX09 id Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870"
John Youn (3): usb: dwc2: Enable LPM usb: dwc2: Enable power down MAINTAINERS: Update maintainer for dwc2
Kai-Heng Feng (4): usb: core: Add "quirks" parameter for usbcore usb: core: Add "quirks" parameter for usbcore usb: core: Copy parameter string correctly and remove superfluous null check usb: core: Add USB_QUIRK_DELAY_CTRL_MSG to usbcore quirks
Kees Cook (1): USB: chaoskey: Use kasprintf() over strcpy()/strcat()
Kirill Kapranov (2): USB: adutux: Delete a misleading comment USB: adutux: Add waiting in transfer abortion
Ladislav Michl (1): usb: gadget: udc: atmel: Use devm_ioremap_resource()
Lars-Peter Clausen (2): usb: gadget: ffs: Execute copy_to_user() with USER_DS set usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS
Linus Walleij (2): usb: phy: ab8500: Drop AB8540/9540 support usb: phy: ab8500: Drop AB8540/9540 support
Lu Baolu (2): usb: xhci: Remove ep_trb from xhci_cleanup_halted_endpoint() usb: xhci: Remove ep_trb from finish_td()
Ludovic Desroches (2): usb: gadget: udc: atmel: remove code related to platform stuff usb: gadget: udc: atmel: convert to use GPIO descriptors
Major Hayden (1): USB: serial: ftdi_sio: add RT Systems VX-8 cable
Manu Gautam (15): phy: qcom-qmp: Power-on PHY before initialization phy: qcom-qusb2: Power-on PHY before initialization phy: qcom-qmp: Fix PHY block reset sequence phy: qcom-qmp: Move SERDES/PCS START after PHY reset phy: qcom-qusb2: Add support for different register layouts dt-bindings: phy-qcom-qusb2: Update binding for QUSB2 V2 version phy: qcom-qusb2: Add support for QUSB2 V2 version phy: qcom-qmp: Move register offsets to header file phy: qcom-qmp: Add register offsets for QMP V3 PHY dt-bindings: phy-qcom-qmp: Update bindings for QMP V3 USB PHY phy: qcom-qmp: Add support for QMP V3 USB3 PHY phy: Add USB speed related PHY modes phy: qcom-qusb2: Add support for runtime PM phy: qcom-qmp: Add support for runtime PM phy: add SPDX identifier to QMP and QUSB2 PHY drivers
Marcus Folkesson (1): usb: usb-skeleton: make MODULE_LICENSE and SPDX tag match
Martin Blumenstingl (18): dt-bindings: phy: meson-gxl-usb2-phy: add the reset line and clock phy: amlogic: phy-meson-gxl-usb2: don't log an error on -EPROBE_DEFER phy: amlogic: phy-meson-gxl-usb2: support the clock and reset line phy: amlogic: phy-meson-gxl-usb2: default to host mode phy: amlogic: phy-meson-gxl-usb2: rename some of the U2P_R2 registers dt-bindings: usb: add the documentation for USB HCDs usb: add a flag to skip PHY initialization to struct usb_hcd usb: core: add a wrapper for the USB PHYs on the HCD usb: core: hcd: integrate the PHY wrapper into the HCD core usb: host: xhci-mtk: remove custom USB PHY handling usb: host: ehci-platform: remove custom USB PHY handling usb: host: ohci-platform: remove custom USB PHY handling usb: core: hcd: remove support for initializing a single PHY dt-bindings: usb: add support for dwc3 controller on Amlogic Meson GX usb: dwc3: of-simple: add support for shared and pulsed reset lines usb: dwc3: of-simple: add support for the Amlogic Meson GXL and AXG SoCs dt-bindings: phy: Add support for the USB3 PHY on Amlogic Meson GXL SoCs phy: amlogic: add USB3 PHY support for Meson GXL and GXM
Masahiro Yamada (1): phy: add 'depends on HAS_IOMEM' to fix unmet dependency
Mathias Nyman (7): usb: Don't disable Latency tolerance Messaging (LTM) before port reset xhci: zero usb device slot_id member when disabling and freeing a xhci slot xhci: Don't always run the default stop endpoint command completion handler xhci: refactor xhci_urb_enqueue a bit with minor changes xhci: Clear the host side toggle manually when endpoint is soft reset xhci: Show what USB release number the xHC supports from protocol capablity xhci: Add option to get next extended capability in list by passing id = 0
Michael Trimarchi (3): usb: chipidea: usbmisc: evdo is only specific to OTG port usb: chipidea: usbmisc: evdo can be set e/o reset usb: chipidea: usbmisc: small clean up
Mike Looijmans (1): usb: phy-generic: Use gpiod_set_value_cansleep
Minas Harutyunyan (3): usb: dwc2: hcd: Fix host channel halt flow usb: dwc2: host: Fix transaction errors in host mode usb: dwc2: Change TxFIFO and RxFIFO flushing flow
Pengcheng Li (2): dt-bindings: add bindings doc for HiSilicon INNO USB2 PHY phy: add inno-usb2-phy driver for hi3798cv200 SoC
Razmik Karapetyan (9): usb: dwc2: Use AHB burst size parameter usb: dwc2: Set AHB burst size to INCR usb: dwc2: Update dwc2_handle_incomplete_isoc_in() function usb: dwc2: Update dwc2_handle_incomplete_isoc_out() function usb: dwc2: Update GINTSTS_GOUTNAKEFF interrupt handling usb: dwc2: Rename bit set/clear function names usb: dwc2: Remove unnecessary debug prints usb: dwc2: Add ACG support to the driver usb: dwc2: Backup and restore PCGCCTL1 register
Richard Leitner (1): usb: core: introduce per-port over-current counters
Roger Quadros (5): usb: dwc3: core.h: add some register definitions usb: dwc3: prevent setting PRTCAP to OTG from debugfs usb: dwc3: add dual role support using OTG block usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume usb: dwc3: core: Fix broken system suspend/resume on AM437x
Sebastian Reichel (2): usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag usb: chipidea: imx: Fix ULPI on imx53
Sevak Arakelyan (7): usb: dwc2: Update bit polling functionality usb: dwc2: Rename GLPMCFG... definitions usb: dwc2: Add core parameters for LPM support usb: dwc2: gadget: Add functionality to exit from LPM L1 state usb: dwc2: gadget: LPM interrupt handler usb: dwc2: Enable LPM Transaction Received interrupt usb: dwc2: gadget: Configure the core to enable LPM
Shawn Guo (1): dt-bindings: hisilicon: add doc for Hi3798CV200 peripheral controller
Shawn Lin (2): phy: rockchip-emmc: retry calpad busy trimming phy: rockchip-emmc: use regmap_read_poll_timeout to poll dllrdy
ShuFan Lee (2): staging: typec: handle vendor defined part and modify drp toggling flow staging: typec: modify parameter of tcpci_irq
Shuah Khan (6): usbip: tools usbip_attach: Fix cryptic error messages usbip: tools usbip_network: Fix cryptic error messages usbip: tools: add more error codes for usbip request/reply messages usbip: usbip_host_common: Use new error codes to return request status usbip: tools: change to use new error codes in server reply messages usbip: tools: usbipd: exclude exported devices from exportable device list
Souptick Joarder (2): usb: host: ehci: Use dma_pool_zalloc() usb: gadget: udc: bdc: Use dma_pool_zalloc
Stefan Agner (1): usb: phy: ab8500: use correct enum type
Stefan Wahren (1): usb: dwc2: Print error if unable to set DMA coherent mask
Teichmann, Martin (1): USB: serial: ftdi_sio: add Id for Physik Instrumente E-870
Thierry Reding (1): phy: tegra: xusb: Uncomment register write
Thinh Nguyen (13): usb: gadget: mass_storage: Set max_speed to SSP usb: core: urb: Check SSP isoc ep comp descriptor usb: dwc3: pci: Properly cleanup resource usb: dwc3: Add SoftReset PHY synchonization delay usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields usb: dwc3: Check IP revision for GTXFIFOSIZ usb: dwc3: Add DWC_usb31 GRXTHRCFG bit fields usb: dwc3: gadget: Check IP revision for GRXTHRCFG usb: dwc3: Add DWC_usb31 GTXTHRCFG reg fields usb: dwc3: Make TX/RX threshold configurable usb: dwc3: Check for ESS TX/RX threshold config usb: dwc3: Dump LSP and BMU debug info usb: dwc3: Check controller type before setting speed
Tobin C. Harding (1): usb: usbtest: Remove stack VLA usage
Tomeu Vizoso (1): usb: hub: Reduce warning to notice on power loss
Tony Lindgren (1): phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
Ulf Magnusson (1): phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB
Vardan Mikayelyan (19): usb: dwc2: eliminate irq parameter from dwc2_gadget_init usb: dwc2: pci: Replace kzalloc() with devm_kzalloc() usb: dwc2: pci: Move usb_phy_generic_register() usb: dwc2: pci: Move devm_kzalloc() before platform_device_add() usb: dwc2: pci: Handle error cleanup in probe usb: dwc2: Rename hibernation to partial_power_down usb: dwc2: Add hibernation field into dwc2_hw_params usb: dwc2: gadget: Moved dtxfsiz backup array place usb: dwc2: gadget: Fix dwc2_restore_device_registers usb: dwc2: core: Add hibernated flag usb: dwc2: gadget: Add remote_wakeup_allowed flag usb: dwc2: Changes in registers backup/restore functions usb: dwc2: Add helper functions for restore routine usb: dwc2: Add host/device hibernation functions usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation() usb: dwc2: Allow entering hibernation from USB_SUSPEND interrupt usb: dwc2: Add dwc2_handle_gpwrdn_intr() handler usb: dwc2: Change hub-control to allow hibernation usb: dwc2: Force mode optimizations
Vivek Gautam (2): phy: qcom-qmp: Fix phy pipe clock gating phy: qcom-qmp: Adapt to clk_bulk_* APIs
Wei Yongjun (1): usb: roles: Fix return value check in intel_xhci_usb_probe()
William wu (1): phy: rockchip-typec: enable usb3 host during usb3 phy power on
Wolfram Sang (1): usb: gadget: udc: change comparison to bitshift when dealing with a mask
Yavuz, Tuba (1): USB: gadget: f_midi: fixing a possible double-free in f_midi
Yoshihiro Shimoda (3): dt-bindings: rcar-gen3-phy-usb2: Add bindings for r8a77965 phy: rcar-gen3-usb2: Add support for r8a77965 dt-bindings: rcar-gen3-phy-usb3: Add bindings for r8a77965
Zhengjun Xing (1): USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
Documentation/ABI/testing/sysfs-bus-usb | 10 + Documentation/ABI/testing/sysfs-class-usb_role | 21 + Documentation/admin-guide/kernel-parameters.txt | 58 ++ .../bindings/arm/hisilicon/hisilicon.txt | 23 + .../devicetree/bindings/phy/meson-gxl-usb2-phy.txt | 4 + .../devicetree/bindings/phy/meson-gxl-usb3-phy.txt | 31 + .../bindings/phy/phy-hi3798cv200-combphy.txt | 59 ++ .../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 71 +++ .../bindings/phy/phy-mapphone-mdm6600.txt | 29 + .../devicetree/bindings/phy/phy-mtk-tphy.txt | 4 + .../devicetree/bindings/phy/phy-rockchip-typec.txt | 35 +- .../devicetree/bindings/phy/phy-stm32-usbphyc.txt | 73 +++ .../devicetree/bindings/phy/qcom-qmp-phy.txt | 6 +- .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 5 +- .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 + .../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt | 2 + .../devicetree/bindings/phy/sun4i-usb-phy.txt | 1 + .../devicetree/bindings/usb/amlogic,dwc3.txt | 42 ++ Documentation/devicetree/bindings/usb/dwc3.txt | 16 + .../devicetree/bindings/usb/mediatek,mtk-xhci.txt | 5 +- .../devicetree/bindings/usb/mediatek,mtu3.txt | 5 +- Documentation/devicetree/bindings/usb/usb-ehci.txt | 6 +- Documentation/devicetree/bindings/usb/usb-hcd.txt | 9 + Documentation/devicetree/bindings/usb/usb-ohci.txt | 6 +- Documentation/devicetree/bindings/usb/usb-uhci.txt | 3 + Documentation/devicetree/bindings/usb/usb-xhci.txt | 5 + Documentation/driver-api/device_connection.rst | 43 ++ Documentation/driver-api/usb/typec.rst | 73 ++- MAINTAINERS | 14 +- arch/mips/Kconfig | 1 + drivers/base/Makefile | 3 +- drivers/base/devcon.c | 136 +++++ drivers/extcon/Kconfig | 3 +- drivers/extcon/extcon-axp288.c | 176 +++++- drivers/phy/allwinner/phy-sun4i-usb.c | 22 +- drivers/phy/amlogic/Kconfig | 13 +- drivers/phy/amlogic/Makefile | 1 + drivers/phy/amlogic/phy-meson-gxl-usb2.c | 78 ++- drivers/phy/amlogic/phy-meson-gxl-usb3.c | 282 +++++++++ drivers/phy/hisilicon/Kconfig | 20 + drivers/phy/hisilicon/Makefile | 2 + drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 197 +++++++ drivers/phy/hisilicon/phy-histb-combphy.c | 289 +++++++++ drivers/phy/marvell/phy-berlin-usb.c | 2 +- drivers/phy/mediatek/phy-mtk-tphy.c | 23 +- drivers/phy/motorola/Kconfig | 8 + drivers/phy/motorola/Makefile | 1 + drivers/phy/motorola/phy-mapphone-mdm6600.c | 542 +++++++++++++++++ drivers/phy/phy-core.c | 2 + drivers/phy/phy-lpc18xx-usb-otg.c | 8 +- drivers/phy/qualcomm/phy-qcom-qmp.c | 647 ++++++++++++++------- drivers/phy/qualcomm/phy-qcom-qmp.h | 280 +++++++++ drivers/phy/qualcomm/phy-qcom-qusb2.c | 418 ++++++++++--- drivers/phy/ralink/Kconfig | 1 + drivers/phy/renesas/phy-rcar-gen3-usb2.c | 4 + drivers/phy/rockchip/Kconfig | 1 + drivers/phy/rockchip/phy-rockchip-emmc.c | 60 +- drivers/phy/rockchip/phy-rockchip-typec.c | 160 +++-- drivers/phy/samsung/Kconfig | 2 +- drivers/phy/st/Kconfig | 14 + drivers/phy/st/Makefile | 1 + drivers/phy/st/phy-stm32-usbphyc.c | 461 +++++++++++++++ drivers/phy/tegra/xusb-tegra210.c | 6 +- drivers/phy/tegra/xusb.c | 2 +- drivers/platform/x86/intel_cht_int33fe.c | 24 + drivers/staging/typec/tcpci.c | 127 +++- drivers/staging/typec/tcpci.h | 14 + drivers/usb/Kconfig | 5 + drivers/usb/Makefile | 2 + drivers/usb/chipidea/ci_hdrc_imx.c | 15 +- drivers/usb/chipidea/debug.c | 65 +-- drivers/usb/chipidea/host.c | 6 +- drivers/usb/chipidea/usbmisc_imx.c | 26 +- drivers/usb/common/Makefile | 1 + drivers/usb/common/roles.c | 305 ++++++++++ drivers/usb/core/Makefile | 2 +- drivers/usb/core/generic.c | 9 +- drivers/usb/core/hcd.c | 64 +- drivers/usb/core/hub.c | 26 +- drivers/usb/core/hub.h | 1 + drivers/usb/core/phy.c | 158 +++++ drivers/usb/core/phy.h | 7 + drivers/usb/core/port.c | 10 + drivers/usb/core/quirks.c | 186 +++++- drivers/usb/core/urb.c | 8 + drivers/usb/core/usb-acpi.c | 4 +- drivers/usb/core/usb.c | 1 + drivers/usb/core/usb.h | 1 + drivers/usb/dwc2/core.c | 395 +++++++++---- drivers/usb/dwc2/core.h | 136 +++-- drivers/usb/dwc2/core_intr.c | 304 +++++++++- drivers/usb/dwc2/debugfs.c | 91 +-- drivers/usb/dwc2/gadget.c | 403 ++++++++++--- drivers/usb/dwc2/hcd.c | 445 ++++++++++---- drivers/usb/dwc2/hcd.h | 56 -- drivers/usb/dwc2/hw.h | 44 +- drivers/usb/dwc2/params.c | 91 ++- drivers/usb/dwc2/pci.c | 27 +- drivers/usb/dwc2/platform.c | 16 +- drivers/usb/dwc3/Makefile | 2 +- drivers/usb/dwc3/core.c | 134 ++++- drivers/usb/dwc3/core.h | 146 +++++ drivers/usb/dwc3/debugfs.c | 84 ++- drivers/usb/dwc3/drd.c | 489 +++++++++++++++- drivers/usb/dwc3/dwc3-of-simple.c | 31 +- drivers/usb/dwc3/dwc3-pci.c | 2 +- drivers/usb/dwc3/ep0.c | 2 +- drivers/usb/dwc3/gadget.c | 82 ++- drivers/usb/gadget/composite.c | 126 ++-- drivers/usb/gadget/function/f_fs.c | 6 +- drivers/usb/gadget/function/f_midi.c | 3 +- drivers/usb/gadget/function/f_tcm.c | 2 +- drivers/usb/gadget/legacy/mass_storage.c | 2 +- drivers/usb/gadget/u_f.h | 2 + drivers/usb/gadget/udc/atmel_usba_udc.c | 158 ++--- drivers/usb/gadget/udc/atmel_usba_udc.h | 4 +- drivers/usb/gadget/udc/bcm63xx_udc.c | 33 +- drivers/usb/gadget/udc/bdc/bdc_ep.c | 3 +- drivers/usb/gadget/udc/core.c | 7 +- drivers/usb/gadget/udc/dummy_hcd.c | 2 +- drivers/usb/gadget/udc/goku_udc.h | 2 +- drivers/usb/gadget/udc/gr_udc.c | 17 +- drivers/usb/gadget/udc/pxa25x_udc.c | 20 +- drivers/usb/gadget/udc/pxa27x_udc.c | 42 +- drivers/usb/host/Kconfig | 25 - drivers/usb/host/Makefile | 2 +- drivers/usb/host/ehci-fsl.c | 2 + drivers/usb/host/ehci-mem.c | 3 +- drivers/usb/host/ehci-platform.c | 55 +- drivers/usb/host/ehci-sched.c | 6 +- drivers/usb/host/ehci-tegra.c | 1 + drivers/usb/host/fhci-dbg.c | 26 +- drivers/usb/host/imx21-dbg.c | 65 +-- drivers/usb/host/isp116x-hcd.c | 15 +- drivers/usb/host/ohci-omap.c | 1 + drivers/usb/host/ohci-platform.c | 56 +- drivers/usb/host/sl811-hcd.c | 17 +- drivers/usb/host/whci/debug.c | 48 +- drivers/usb/host/xhci-dbgtty.c | 5 +- drivers/usb/host/xhci-ext-caps.c | 90 +++ drivers/usb/host/xhci-ext-caps.h | 7 +- drivers/usb/host/xhci-mem.c | 2 + drivers/usb/host/xhci-mtk.c | 98 +--- drivers/usb/host/xhci-pci.c | 5 + drivers/usb/host/xhci-plat.c | 1 + drivers/usb/host/xhci-ring.c | 27 +- drivers/usb/host/xhci.c | 139 ++++- drivers/usb/host/xhci.h | 4 + drivers/usb/isp1760/isp1760-udc.c | 6 +- drivers/usb/misc/adutux.c | 4 +- drivers/usb/misc/chaoskey.c | 8 +- drivers/usb/misc/usbtest.c | 5 +- drivers/usb/misc/uss720.c | 7 +- drivers/usb/musb/musb_debugfs.c | 13 +- drivers/usb/musb/musb_gadget_ep0.c | 14 +- drivers/usb/phy/phy-ab8500-usb.c | 508 +--------------- drivers/usb/phy/phy-generic.c | 6 +- drivers/usb/phy/phy-mxs-usb.c | 2 +- drivers/usb/phy/phy-tegra-usb.c | 14 +- drivers/usb/roles/Kconfig | 14 + drivers/usb/roles/Makefile | 1 + drivers/usb/roles/intel-xhci-usb-role-switch.c | 192 ++++++ drivers/usb/serial/cp210x.c | 1 + drivers/usb/serial/ftdi_sio.c | 2 + drivers/usb/serial/ftdi_sio_ids.h | 9 + drivers/usb/serial/option.c | 457 +++++---------- drivers/usb/typec/Kconfig | 3 + drivers/usb/typec/Makefile | 2 + drivers/usb/typec/{typec.c => class.c} | 168 ++++-- drivers/usb/typec/fusb302/fusb302.c | 19 +- drivers/usb/typec/mux.c | 191 ++++++ drivers/usb/typec/mux/Kconfig | 10 + drivers/usb/typec/mux/Makefile | 3 + drivers/usb/typec/mux/pi3usb30532.c | 178 ++++++ drivers/usb/typec/tcpm.c | 96 +-- drivers/usb/typec/tps6598x.c | 41 +- drivers/usb/typec/typec_wcove.c | 1 + drivers/usb/typec/ucsi/ucsi.c | 44 +- drivers/usb/usb-skeleton.c | 2 +- drivers/usb/usbip/Kconfig | 2 +- drivers/usb/wusbcore/crypto.c | 8 +- drivers/usb/wusbcore/wa-nep.c | 1 - drivers/uwb/uwb-debug.c | 32 +- include/linux/device.h | 22 + include/linux/phy/phy.h | 31 +- include/linux/usb/composite.h | 3 + include/linux/usb/gadget.h | 1 + include/linux/usb/hcd.h | 8 +- include/linux/usb/pd.h | 185 +++++- include/linux/usb/pd_ado.h | 42 ++ include/linux/usb/pd_ext_sdb.h | 31 + include/linux/usb/role.h | 53 ++ include/linux/usb/tcpm.h | 15 +- include/linux/usb/typec.h | 28 +- include/linux/usb/typec_mux.h | 55 ++ tools/usb/usbip/libsrc/usbip_common.c | 23 + tools/usb/usbip/libsrc/usbip_common.h | 11 + tools/usb/usbip/libsrc/usbip_host_common.c | 5 +- tools/usb/usbip/src/usbip_attach.c | 10 +- tools/usb/usbip/src/usbip_list.c | 6 +- tools/usb/usbip/src/usbip_network.c | 10 +- tools/usb/usbip/src/usbip_network.h | 6 +- tools/usb/usbip/src/usbipd.c | 34 +- 203 files changed, 9264 insertions(+), 3082 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-class-usb_role create mode 100644 Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt create mode 100644 Documentation/devicetree/bindings/usb/amlogic,dwc3.txt create mode 100644 Documentation/devicetree/bindings/usb/usb-hcd.txt create mode 100644 Documentation/driver-api/device_connection.rst create mode 100644 drivers/base/devcon.c create mode 100644 drivers/phy/amlogic/phy-meson-gxl-usb3.c create mode 100644 drivers/phy/hisilicon/phy-hisi-inno-usb2.c create mode 100644 drivers/phy/hisilicon/phy-histb-combphy.c create mode 100644 drivers/phy/motorola/phy-mapphone-mdm6600.c create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp.h create mode 100644 drivers/phy/st/phy-stm32-usbphyc.c create mode 100644 drivers/usb/common/roles.c create mode 100644 drivers/usb/core/phy.c create mode 100644 drivers/usb/core/phy.h create mode 100644 drivers/usb/host/xhci-ext-caps.c create mode 100644 drivers/usb/roles/Kconfig create mode 100644 drivers/usb/roles/Makefile create mode 100644 drivers/usb/roles/intel-xhci-usb-role-switch.c rename drivers/usb/typec/{typec.c => class.c} (91%) create mode 100644 drivers/usb/typec/mux.c create mode 100644 drivers/usb/typec/mux/Kconfig create mode 100644 drivers/usb/typec/mux/Makefile create mode 100644 drivers/usb/typec/mux/pi3usb30532.c create mode 100644 include/linux/usb/pd_ado.h create mode 100644 include/linux/usb/pd_ext_sdb.h create mode 100644 include/linux/usb/role.h create mode 100644 include/linux/usb/typec_mux.h
| |