[lkml]   [2018]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 0/2] watchdog: Add Nuvoton NPCM (Poleg) driver
v4: Fix comments from Guenter
v3: Address comments from Guenter and Tomer, add Rob's review
v2: Address comments from Guenter and Marcus

This is a driver for the Poleg board that is in the process of being
upstreamed. I have tested it on an evaluation board.

The watchdog is a single register inside of the timer IP. This made me
think about how to describe the device tree bindings for a while, but
after some discussion I settled on describing the watchdog separately,
and giving it's own compatible string, and it's own driver.

The timer is being reviewed over here:

Joel Stanley (2):
dt-bindings: watchdog: Add Nuvoton NPCM description
watchdog: Add Nuvoton NPCM watchdog driver

.../bindings/watchdog/nuvoton,npcm-wdt.txt | 28 +++
drivers/watchdog/Kconfig | 11 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/npcm_wdt.c | 254 +++++++++++++++++++++
4 files changed, 294 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
create mode 100644 drivers/watchdog/npcm_wdt.c


 \ /
  Last update: 2018-03-13 07:18    [W:0.043 / U:21.140 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site