lkml.org 
[lkml]   [2018]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 9/9] dt-bindings: fpga: Add binding doc for the afi config driver
Date
Add the binding document for the afi config driver.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
---
.../devicetree/bindings/fpga/xlnx,afi-fpga.txt | 67 ++++++++++++++++++++++
1 file changed, 67 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,afi-fpga.txt

diff --git a/Documentation/devicetree/bindings/fpga/xlnx,afi-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,afi-fpga.txt
new file mode 100644
index 0000000..9006e72
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,afi-fpga.txt
@@ -0,0 +1,67 @@
+Xilinx ZynqMp AFI interface Manager
+
+The Zynq UltraScale+ MPSoC Processing System core provides access from PL
+masters to PS internal peripherals, and memory through AXI FIFO interface
+(AFI) interfaces.
+
+Required properties:
+-compatible: Should contain "xlnx,afi-fpga"
+-config-afi: Pairs of <regid value >
+
+The possible values of regid and values are
+ regid: Regids of the register to be written possible values
+ 0- AFIFM0_RDCTRL
+ 1- AFIFM0_WRCTRL
+ 2- AFIFM1_RDCTRL
+ 3- AFIFM1_WRCTRL
+ 4- AFIFM2_RDCTRL
+ 5- AFIFM2_WRCTRL
+ 6- AFIFM3_RDCTRL
+ 7- AFIFM3_WRCTRL
+ 8- AFIFM4_RDCTRL
+ 9- AFIFM4_WRCTRL
+ 10- AFIFM5_RDCTRL
+ 11- AFIFM5_WRCTRL
+ 12- AFIFM6_RDCTRL
+ 13- AFIFM6_WRCTRL
+ 14- AFIFS
+ 15- AFIFS_SS2
+- value: Array of values to be written.
+ for FM0_RDCTRL(0) the valid values-fabric width 2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+ for FM0_WRCTRL(1) the valid values-fabric width 2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+ for FM1_RDCTRL(2) the valid values-fabric width 2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+ for FM1_WRCTRL(3) the valid values-fabric width 2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+ for FM2_RDCTRL(4) the valid values-fabric width 2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+ for FM2_WRCTRL(5) the valid values-fabric width 2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+ for FM3_RDCTRL(6) the valid values-fabric width 2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+ for FM3_WRCTRL(7) the valid values-fabric width 2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+ for FM4_RDCTRL(8) the valid values-fabric width 2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+ for FM4_WRCTRL(9) the valid values-fabric width 2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+ for FM5_RDCTRL(10) the valid values-fabric width 2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+ for FM5_WRCTRL(11) the valid values-fabric width 2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+ for FM6_RDCTRL(12) the valid values-fabric width 2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+ for FM6_WRCTRL(13) the valid values-fabric width 2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+ for AFI_FA(14)
+ dw_ss1_sel bits (11:10)
+ dw_ss0_sel bits (9:8)
+ 0x0: 32-bit AXI data width),
+ 0x1: 64-bit AXI data width,
+ 0x2: 128-bit AXI data
+ All other bits are 0 write ignored.
+
+ for AFI_FA(15) selects for ss2AXI data width valid values
+ 0x000: 32-bit AXI data width),
+ 0x100: 64-bit AXI data width,
+ 0x200: 128-bit AXI data
+
+Example:
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+ afi0: afi0 {
+ compatible = "xlnx,afi-fpga";
+ config-afi = <0 2>, <1 1>, <2 1>;
+ };
+ };
+};
--
2.7.4
\
 
 \ /
  Last update: 2018-11-17 00:58    [W:1.076 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site