lkml.org 
[lkml]   [2017]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 11/12] spmi: pmic-arb: add support for HW version 5
Hi Kiran,

On Fri, Jul 28, 2017 at 12:40:46PM +0530, Kiran Gunda wrote:
> From: David Collins <collinsd@codeaurora.org>
>
> Add support for version 5 of the SPMI PMIC arbiter. It utilizes
> different offsets for registers than those found on version 3.
> Also, the procedure to determine if writing and IRQ access is
> allowed for a given PPID changes for version 5.
>
> Signed-off-by: David Collins <collinsd@codeaurora.org>
> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
> ---
> drivers/spmi/spmi-pmic-arb.c | 236 +++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 214 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> index bc68e08..3f46445 100644
> --- a/drivers/spmi/spmi-pmic-arb.c
> +++ b/drivers/spmi/spmi-pmic-arb.c

<snip>

> @@ -680,12 +701,19 @@ static int qpnpint_irq_domain_dt_translate(struct irq_domain *d,
> ppid = intspec[0] << 8 | intspec[1];
> rc = pmic_arb->ver_ops->ppid_to_apid(pmic_arb, ppid);
> if (rc < 0) {
> - dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = 0x%x, periph = 0x%x, irq = %x rc = %d\n",
> + dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u rc = %d\n",
> intspec[0], intspec[1], intspec[2], rc);
> return rc;
> }
>
> apid = rc;
> + if (pmic_arb->apid_data[apid].irq_ee != pmic_arb->ee) {
> + dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u: ee=%u but owner=%u\n",
> + intspec[0], intspec[1], intspec[2], pmic_arb->ee,
> + pmic_arb->apid_data[apid].irq_ee);
> + return -ENODEV;
> + }
> +

It seems to me that this check breaks pm8916_gpios on db410c. It causes
the failure of pinctrl-spmi-gpio driver probing, because npins returned
from platform_irq_count() call is 0.

Shawn

> /* Keep track of {max,min}_apid for bounding search during interrupt */
> if (apid > pmic_arb->max_apid)
> pmic_arb->max_apid = apid;

\
 
 \ /
  Last update: 2017-08-17 09:44    [W:1.960 / U:0.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site