Messages in this thread Patch in this message | | | From | Stefan Brüns <> | Subject | [PATCH 1/2] arm64: allwinner: a64: add SPI nodes | Date | Sat, 12 Aug 2017 00:28:12 +0200 |
| |
The A64 SPI controllers are register compatible to the h3/h5 SPI controllers.
The A64 has two SPI controllers, each with a single chip select. The handles for the DMA channels (23/24 for SPI0/SPI1) are omitted, as the A64 DMA support is currently missing.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 40 +++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index bd0f33b77f57..373cd14f0206 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -325,6 +325,16 @@ drive-strength = <40>; }; + spi0_pins: spi0 { + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; + }; + + spi1_pins: spi1 { + pins = "PD0", "PD1", "PD2", "PD3"; + function = "spi1"; + }; + uart0_pins_a: uart0@0 { pins = "PB8", "PB9"; function = "uart0"; @@ -527,5 +537,35 @@ #address-cells = <1>; #size-cells = <0>; }; + + spi0: spi@01c68000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c68000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@01c69000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c69000 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; -- 2.13.3
| |