lkml.org 
[lkml]   [2017]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 4/5] arm64: dts: rockchip: add thermal nodes for rk3328 SoC
From
Date
在 2017年08月04日 16:06, Rocky Hao 写道:
> add thermal zone and dynamic CPU power coefficients for rk3328
>
> Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
> ---
> Change in v2:
> - remove gerrit Change-Id
>
> arch/arm64/boot/dts/rockchip/rk3328.dtsi | 43 ++++++++++++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> index 186fb93fdffd..68829f808320 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> @@ -47,6 +47,7 @@
> #include <dt-bindings/pinctrl/rockchip.h>
> #include <dt-bindings/power/rk3328-power.h>
> #include <dt-bindings/soc/rockchip,boot-mode.h>
> +#include <dt-bindings/thermal/thermal.h>
>
> / {
> compatible = "rockchip,rk3328";
> @@ -74,6 +75,8 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x0>;
> clocks = <&cru ARMCLK>;
> + #cooling-cells = <2>; /* min followed by max */
> + dynamic-power-coefficient = <120>;
> enable-method = "psci";
> next-level-cache = <&l2>;
> };
> @@ -83,6 +86,7 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x1>;
> clocks = <&cru ARMCLK>;
> + dynamic-power-coefficient = <120>;
> enable-method = "psci";
> next-level-cache = <&l2>;
> };
> @@ -92,6 +96,7 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x2>;
> clocks = <&cru ARMCLK>;
> + dynamic-power-coefficient = <120>;
> enable-method = "psci";
> next-level-cache = <&l2>;
> };
> @@ -101,6 +106,7 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x3>;
> clocks = <&cru ARMCLK>;
> + dynamic-power-coefficient = <120>;
> enable-method = "psci";
> next-level-cache = <&l2>;
> };
> @@ -308,6 +314,43 @@
> interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + thermal-zones {
> + soc_thermal: soc-thermal {
> + polling-delay-passive = <20>; /* milliseconds */
> + polling-delay = <1000>; /* milliseconds */
> + sustainable-power = <1000>; /* milliwatts */
> +
> + thermal-sensors = <&tsadc 0>;
> +
> + trips {
> + threshold: trip-point0 {
> + temperature = <70000>; /* millicelsius */
> + hysteresis = <2000>; /* millicelsius */
> + type = "passive";
> + };
> + target: trip-point1 {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <2000>; /* millicelsius */
> + type = "passive";
> + };
> + soc_crit: soc-crit {
> + temperature = <95000>; /* millicelsius */
> + hysteresis = <2000>; /* millicelsius */

The document had already described, maybe we should remove the
millicelsius/milliseconds/milliwatts here.
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&target>;
> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + contribution = <4096>;
> + };
> + };
> + };
> +
> + };
> +
> tsadc: tsadc@ff250000 {
> compatible = "rockchip,rk3328-tsadc";
> reg = <0x0 0xff250000 0x0 0x100>;


\
 
 \ /
  Last update: 2017-08-11 08:45    [W:0.193 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site