Messages in this thread | | | From | Gary Bisson <> | Date | Mon, 24 Jul 2017 14:52:57 +0200 | Subject | Re: [PATCH 1/2] ARM: dts: imx6qdl-sabrelite: fix USB PHY reset |
| |
Hi Fabio,
On Mon, Jul 24, 2017 at 2:49 PM, Fabio Estevam <festevam@gmail.com> wrote: > > Hi Gary, > > On Mon, Jul 24, 2017 at 5:50 AM, Gary Bisson > <gary.bisson@boundarydevices.com> wrote: > > > + > > + reg_usb_h1_vbus: regulator@7 { > > + compatible = "regulator-fixed"; > > + reg = <7>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_usbh1>; > > + regulator-name = "usb_h1_vbus"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + regulator-always-on; > > As this regulator is controlled via GPIO I believe you should remove > the ' regulator-always-on' property. > > Same applies to 2/2/
Good catch, I'll send a v2 right away.
Thanks, Gary
| |