lkml.org 
[lkml]   [2017]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] ARM: dts: imx6qdl-sabrelite: fix USB PHY reset
Hi Gary,

On Mon, Jul 24, 2017 at 5:50 AM, Gary Bisson
<gary.bisson@boundarydevices.com> wrote:

> +
> + reg_usb_h1_vbus: regulator@7 {
> + compatible = "regulator-fixed";
> + reg = <7>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbh1>;
> + regulator-name = "usb_h1_vbus";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + regulator-always-on;

As this regulator is controlled via GPIO I believe you should remove
the ' regulator-always-on' property.

Same applies to 2/2/

\
 
 \ /
  Last update: 2017-07-24 14:50    [W:0.246 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site