lkml.org 
[lkml]   [2017]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: get/put_cpu() usage in block/blk-mq.c
From
Date
On 05/09/2017 12:07 AM, Mike Galbraith wrote:
> Hi Jens,
>
> I was about to fix up this splat..
>
> [ 445.022141] loop: module loaded
> [ 445.078116] BUG: using smp_processor_id() in preemptible [00000000] code: loop0/3801
> [ 445.085873] caller is debug_smp_processor_id+0x17/0x20
> [ 445.091016] CPU: 7 PID: 3801 Comm: loop0 Tainted: G E 4.12.0-default #40
> [ 445.098838] Hardware name: IBM System x3550 M3 -[7944K3G]-/69Y5698 , BIOS -[D6E150AUS-1.10]- 12/15/2010
> [ 445.108564] Call Trace:
> [ 445.111016] dump_stack+0x65/0x89
> [ 445.114330] check_preemption_disabled+0xde/0xf0
> [ 445.118945] debug_smp_processor_id+0x17/0x20
> [ 445.123300] blk_stat_add+0xb0/0x130
> [ 445.126876] __blk_mq_complete_request+0xb5/0x150
> [ 445.131575] blk_mq_complete_request+0x16/0x20
> [ 445.136020] loop_queue_work+0x5f/0xaa0 [loop]
> [ 445.140461] ? _raw_spin_unlock_irq+0x21/0x40
> [ 445.144816] ? finish_task_switch+0x85/0x270
> [ 445.149085] ? __schedule+0x291/0x8c0
> [ 445.152747] kthread_worker_fn+0xc2/0x1d0
> [ 445.156754] kthread+0x114/0x150
> [ 445.159983] ? __kthread_init_worker+0xb0/0xb0
> [ 445.164424] ? kthread_park+0x60/0x60
> [ 445.168085] ret_from_fork+0x2c/0x40

Is it from this_cpu_ptr() in blk_stat_add()?

> ..but then noticed that __blk_mq_run_hw_queue() is also called under
> get_cpu(), but recently grew a might_sleep(), so maybe wants some block
> layer eyeballs.

That part is fine. The might sleep depends on BLOCKING being set in
the hardware queue flags. And if that is set, then we don't call
it under get_cpu().

--
Jens Axboe

\
 
 \ /
  Last update: 2017-05-10 21:18    [W:0.080 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site