lkml.org 
[lkml]   [2017]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: dwc2: resume root hub to handle disconnect of device
Date
When handle disconnect of the hcd during bus_suspend, hcd
needs to resume its root hub, otherwise the root hub will
not disconnect the existing devices under its port.

This issue always happens when connecting with usb devices
which support auto-suspend function (e.g. usb hub).

Signed-off-by: William Wu <william.wu@rock-chips.com>
---
drivers/usb/dwc2/hcd.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 740c7e8..cc84f97 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1975,11 +1975,13 @@ void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force)
* Without the extra check here we will end calling disconnect
* and won't get any future interrupts to handle the connect.
*/
- if (!force) {
- hprt0 = dwc2_readl(hsotg->regs + HPRT0);
- if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS))
- dwc2_hcd_connect(hsotg);
- }
+ hprt0 = dwc2_readl(hsotg->regs + HPRT0);
+
+ if (!force && !(hprt0 & HPRT0_CONNDET) &&
+ (hprt0 & HPRT0_CONNSTS))
+ dwc2_hcd_connect(hsotg);
+ else if (hsotg->lx_state != DWC2_L0)
+ usb_hcd_resume_root_hub(hsotg->priv);
}

/**
--
2.0.0

\
 
 \ /
  Last update: 2017-05-27 05:25    [W:0.063 / U:0.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site