lkml.org 
[lkml]   [2017]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 31/34] media: imx: csi: add frame size/interval enumeration
Date
From: Russell King <rmk+kernel@armlinux.org.uk>

Add frame size and frame interval enumeration to CSI.

CSI can downscale the image independently horizontally and vertically by a
factor of two, which enumerates to four different frame sizes at the
output pads. The input pad supports a range of frame sizes.

CSI can also drop frames, resulting in frame rate reduction, so
enumerate the resulting possible output frame rates.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
---
drivers/staging/media/imx/imx-media-csi.c | 70 +++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)

diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index 9766dee..b8b3630 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -1163,6 +1163,74 @@ static int csi_enum_mbus_code(struct v4l2_subdev *sd,
return ret;
}

+static int csi_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ struct csi_priv *priv = v4l2_get_subdevdata(sd);
+ struct v4l2_rect *crop;
+ int ret = 0;
+
+ if (fse->pad >= CSI_NUM_PADS ||
+ fse->index > (fse->pad == CSI_SINK_PAD ? 0 : 3))
+ return -EINVAL;
+
+ mutex_lock(&priv->lock);
+
+ if (fse->pad == CSI_SINK_PAD) {
+ fse->min_width = MIN_W;
+ fse->max_width = MAX_W;
+ fse->min_height = MIN_H;
+ fse->max_height = MAX_H;
+ } else {
+ crop = __csi_get_crop(priv, cfg, fse->which);
+
+ fse->min_width = fse->max_width = fse->index & 1 ?
+ crop->width / 2 : crop->width;
+ fse->min_height = fse->max_height = fse->index & 2 ?
+ crop->height / 2 : crop->height;
+ }
+
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+static int csi_enum_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_interval_enum *fie)
+{
+ struct csi_priv *priv = v4l2_get_subdevdata(sd);
+ struct v4l2_fract *input_fi;
+ struct v4l2_rect *crop;
+ int ret = 0;
+
+ if (fie->pad >= CSI_NUM_PADS ||
+ fie->index >= (fie->pad != CSI_SRC_PAD_IDMAC ?
+ 1 : ARRAY_SIZE(csi_skip)))
+ return -EINVAL;
+
+ mutex_lock(&priv->lock);
+
+ input_fi = &priv->frame_interval[CSI_SINK_PAD];
+ crop = __csi_get_crop(priv, cfg, fie->which);
+
+ if ((fie->width != crop->width && fie->width != crop->width / 2) ||
+ (fie->height != crop->height && fie->height != crop->height / 2)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ fie->interval = *input_fi;
+
+ if (fie->pad == CSI_SRC_PAD_IDMAC)
+ csi_apply_skip_interval(&csi_skip[fie->index],
+ &fie->interval);
+
+out:
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
static int csi_get_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *sdformat)
@@ -1631,6 +1699,8 @@ static const struct v4l2_subdev_video_ops csi_video_ops = {

static const struct v4l2_subdev_pad_ops csi_pad_ops = {
.enum_mbus_code = csi_enum_mbus_code,
+ .enum_frame_size = csi_enum_frame_size,
+ .enum_frame_interval = csi_enum_frame_interval,
.get_fmt = csi_get_fmt,
.set_fmt = csi_set_fmt,
.get_selection = csi_get_selection,
--
2.7.4
\
 
 \ /
  Last update: 2017-05-25 02:33    [W:0.338 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site