lkml.org 
[lkml]   [2017]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 06/13] ARM: dts: armada-385-linksys: usb3 label cleanup
Date
Now that we use the reference for the USB3.0 port update the node name
and labels for the phy and vbus to match the label used by
armada-38x.dtsi.

Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>

---

Notes:

Going by documentation regulator-name is only of informative nature so
changing it should be a non issue.
---
arch/arm/boot/dts/armada-385-linksys.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 932fca4..6cc1ec7 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -63,16 +63,16 @@
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
};

- usb3_phy: usb3_phy {
+ usb3_1_phy: usb3_1-phy {
compatible = "usb-nop-xceiv";
- vcc-supply = <&reg_xhci0_vbus>;
+ vcc-supply = <&usb3_1_vbus>;
};

- reg_xhci0_vbus: xhci0-vbus {
+ usb3_1_vbus: usb3_1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&xhci0_vbus_pins>;
- regulator-name = "xhci0-vbus";
+ pinctrl-0 = <&usb3_1_vbus_pins>;
+ regulator-name = "usb3_1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
@@ -371,7 +371,7 @@
marvell,function = "gpio";
};

- xhci0_vbus_pins: xhci0-vbus-pins {
+ usb3_1_vbus_pins: usb3_1-vbus-pins {
marvell,pins = "mpp50";
marvell,function = "gpio";
};
@@ -393,5 +393,5 @@

&usb3_1 {
status = "okay";
- usb-phy = <&usb3_phy>;
+ usb-phy = <&usb3_1_phy>;
};
--
2.10.2
\
 
 \ /
  Last update: 2017-05-21 14:52    [W:0.143 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site