lkml.org 
[lkml]   [2017]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 00/13] Linksys WRT3200ACM (Rango) support
Date
Hi Ralph,

On dim., mai 21 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:

> Hi everyone
>
> This series adds support for the latest model in Linksys WRT AC series
> of routers. The WRT3200ACM was released in October 2016 and the code
> name is Rango.
>
> As it comes with a flash chip twice as big the dts Imre Kaloz has
> written for OpenWrt isn't based on armada-385-linksys.dtsi to avoid
> conflicts. Nonetheless its part of the same family, so the bigger part
> of this series is dedicated to reorganize / modernize / cleanup /
> somewhat future proof the armada-385-linksys.dtsi and it's dependants so
> the dts for the Rango addition can use the same dtsi.
>
> Key differences to the earlier Armada-385 based devices in the series is
> a bigger flash chip, next generation wireless modules in the mini pcie
> slots as well as a Marvell SD8887. Finally the CPU is clocked at 1866
> GHz by default.
>
> The series depends on Linux 4.12-rc1 and is targeted for 4.13.
>
> Ralph
>
>

I applied the 11 first patches on mvebu/dt. I added the "Signed-off-by"
from Imre Kaloz <kaloz@openwrt.org> on all of them and the "Reviewed-by"
from Andrew Lunn <andrew@lunn.ch> when approriate.

I also did the following things:

> Ralph Sennhauser (13):
> ARM: dts: armada-385-linksys: flatten dtsi
> ARM: dts: armada-385-linksys: label nodes
Fixed typo pointed by Andrew

> ARM: dts: armada-385-linksys: flatten dependants
Fixed typo pointed by Andrew

Something that I didn't change is the word "dependants", I don't know
what do you means exactly. But not being native speaker I maybe missed
something.

> ARM: dts: armada-385-linksys: drop redundant properties in dependants
> ARM: dts: armada-385-linksys: bm pools by label order
> ARM: dts: armada-385-linksys: usb3 label cleanup

I applied this one because I found Ralph explanation convincing about not
modifying the ABI

> ARM: dts: armada-385-linksys: drop leagcy DSA bindings
Fixed typo in title and commit log

> ARM: dts: armada-385-linksys: use binary unit prefixes

As Ralph I prefer that we use normalized unit. Especially when we use
MiB or KiB then we are sure that we use a power of 2, whereas when we
see KB we don't know if it is 1024B or 1000B.

> ARM: dts: armada-385-linksys: partition layout is board specific
> ARM: dts: armada-385-linksys: group pins in pinctrl
> ARM: dts: armada-385-linksys: fixup button node names

> clk: mvebu: add support for 1866MHz variants

I didn't apply this one as it must go through the clk tree and there was
also a pending question from Andrew.

> ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango)

For this last one do you finally agree to use "non-removable" instead of
"broken-cd" ?

Gregory

>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/armada-385-linksys-caiman.dts | 187 +++++++-----
> arch/arm/boot/dts/armada-385-linksys-cobra.dts | 187 +++++++-----
> arch/arm/boot/dts/armada-385-linksys-rango.dts | 203 +++++++++++++
> arch/arm/boot/dts/armada-385-linksys-shelby.dts | 187 +++++++-----
> arch/arm/boot/dts/armada-385-linksys.dtsi | 362 ++++++++----------------
> drivers/clk/mvebu/armada-38x.c | 3 +-
> 7 files changed, 695 insertions(+), 435 deletions(-)
> create mode 100644 arch/arm/boot/dts/armada-385-linksys-rango.dts
>
> --
> 2.10.2
>

--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

\
 
 \ /
  Last update: 2017-05-23 17:22    [W:1.614 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site