lkml.org 
[lkml]   [2017]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.
Date
Florian Fainelli <f.fainelli@gmail.com> writes:

> On 04/25/2017 04:53 PM, Eric Anholt wrote:
>> Cygnus has a single AMAC controller connected to the B53 switch with 2
>> PHYs. On the BCM911360_EP platform, those two PHYs are connected to
>> the external ethernet jacks.
>>
>> Signed-off-by: Eric Anholt <eric@anholt.net>
>> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>>
>> v2: Call the node "switch", just call the ports "port" (suggestions by
>> Florian), drop max-speed on the phys (suggestion by Andrew Lunn),
>> call the other nodes "ethernet" and "ethernet-phy" (suggestions by
>> Sergei Shtylyov)
>>
>> arch/arm/boot/dts/bcm-cygnus.dtsi | 58 ++++++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/bcm911360_entphn.dts | 8 +++++
>> 2 files changed, 66 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> index 009f1346b817..9fd89be0f5e0 100644
>> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
>> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> @@ -142,6 +142,54 @@
>> interrupts = <0>;
>> };
>>
>> + mdio: mdio@18002000 {
>> + compatible = "brcm,iproc-mdio";
>> + reg = <0x18002000 0x8>;
>> + #size-cells = <1>;
>> + #address-cells = <0>;
>
> Sorry for not noticing earlier, since you override this correctly in the
> board-level DTS file can you put a:
>
> status = "disabled"
>
> property in there by default?

Done.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-04-26 19:28    [W:0.345 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site