lkml.org 
[lkml]   [2017]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] net: macb: fix phy interrupt parsing
Date
Since 83a77e9ec415, the phydev irq is explicitly set to PHY_POLL when
there is no pdata. It doesn't work on DT enabled platforms because the
phydev irq is already set by libphy before.

Fixes: 83a77e9ec415 ("net: macb: Added PCI wrapper for Platform Driver.")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
drivers/net/ethernet/cadence/macb.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index e131ecd17ab9..004223a866fe 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -432,15 +432,17 @@ static int macb_mii_probe(struct net_device *dev)
}

pdata = dev_get_platdata(&bp->pdev->dev);
- if (pdata && gpio_is_valid(pdata->phy_irq_pin)) {
- ret = devm_gpio_request(&bp->pdev->dev, pdata->phy_irq_pin,
- "phy int");
- if (!ret) {
- phy_irq = gpio_to_irq(pdata->phy_irq_pin);
- phydev->irq = (phy_irq < 0) ? PHY_POLL : phy_irq;
+ if (pdata) {
+ if (gpio_is_valid(pdata->phy_irq_pin)) {
+ ret = devm_gpio_request(&bp->pdev->dev,
+ pdata->phy_irq_pin, "phy int");
+ if (!ret) {
+ phy_irq = gpio_to_irq(pdata->phy_irq_pin);
+ phydev->irq = (phy_irq < 0) ? PHY_POLL : phy_irq;
+ }
+ } else {
+ phydev->irq = PHY_POLL;
}
- } else {
- phydev->irq = PHY_POLL;
}

/* attach the mac to the phy */
--
2.11.0
\
 
 \ /
  Last update: 2017-04-26 12:09    [W:0.063 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site