lkml.org 
[lkml]   [2017]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] NFC: trf7970a: fix check of clock frequencies, use && instead of ||
Date
From: Colin Ian King <colin.king@canonical.com>

The "or" condition (clk_freq != TRF7970A_27MHZ_CLOCK_FREQUENCY) ||
(clk_freq != TRF7970A_13MHZ_CLOCK_FREQUE) will always be true because
clk_freq cannot be equal to two different values at the same time. Use
the && operator instead of || to fix this.

Detected by CoverityScan, CID#1430468 ("Constant expression result")

Fixes: 837eb4d21ecde7 ("NFC: trf7970a: add device tree option for 27MHz clock")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
drivers/nfc/trf7970a.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
index 2d1c8ca6e679..00eb6cd2b22f 100644
--- a/drivers/nfc/trf7970a.c
+++ b/drivers/nfc/trf7970a.c
@@ -2071,8 +2071,8 @@ static int trf7970a_probe(struct spi_device *spi)
}

of_property_read_u32(np, "clock-frequency", &clk_freq);
- if ((clk_freq != TRF7970A_27MHZ_CLOCK_FREQUENCY) ||
- (clk_freq != TRF7970A_13MHZ_CLOCK_FREQUENCY)) {
+ if ((clk_freq != TRF7970A_27MHZ_CLOCK_FREQUENCY) &&
+ (clk_freq != TRF7970A_13MHZ_CLOCK_FREQUENCY)) {
dev_err(trf->dev,
"clock-frequency (%u Hz) unsupported\n",
clk_freq);
--
2.11.0
\
 
 \ /
  Last update: 2017-04-24 15:39    [W:0.052 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site