lkml.org 
[lkml]   [2017]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.10 007/110] PCI: thunder-pem: Add legacy firmware support for Cavium ThunderX host controller
Date
4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomasz Nowicki <tn@semihalf.com>

commit 9abb27c7594a62bbf6385e20b7f5a90b4eceae2f upstream.

During early days of PCI quirks support, ThunderX firmware did not provide
PNP0c02 node with PCI configuration space and PEM-specific register ranges.
This means that for legacy FW we are not reserving these resources and
cannot gather PEM-specific resources for further PEM initialization.

To support already deployed legacy FW, calculate PEM-specific ranges and
provide resources reservation as fallback scenario into PEM driver when we
could not gather PEM reg base from ACPI tables.

Tested-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@caviumnetworks.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/pci/host/pci-thunder-pem.c | 56 +++++++++++++++++++++++++++++++++++--
1 file changed, 54 insertions(+), 2 deletions(-)

--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -14,6 +14,7 @@
* Copyright (C) 2015 - 2016 Cavium, Inc.
*/

+#include <linux/bitfield.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of_address.h>
@@ -319,6 +320,50 @@ static int thunder_pem_init(struct devic

#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)

+#define PEM_RES_BASE 0x87e0c0000000UL
+#define PEM_NODE_MASK GENMASK(45, 44)
+#define PEM_INDX_MASK GENMASK(26, 24)
+#define PEM_MIN_DOM_IN_NODE 4
+#define PEM_MAX_DOM_IN_NODE 10
+
+static void thunder_pem_reserve_range(struct device *dev, int seg,
+ struct resource *r)
+{
+ resource_size_t start = r->start, end = r->end;
+ struct resource *res;
+ const char *regionid;
+
+ regionid = kasprintf(GFP_KERNEL, "PEM RC:%d", seg);
+ if (!regionid)
+ return;
+
+ res = request_mem_region(start, end - start + 1, regionid);
+ if (res)
+ res->flags &= ~IORESOURCE_BUSY;
+ else
+ kfree(regionid);
+
+ dev_info(dev, "%pR %s reserved\n", r,
+ res ? "has been" : "could not be");
+}
+
+static void thunder_pem_legacy_fw(struct acpi_pci_root *root,
+ struct resource *res_pem)
+{
+ int node = acpi_get_node(root->device->handle);
+ int index;
+
+ if (node == NUMA_NO_NODE)
+ node = 0;
+
+ index = root->segment - PEM_MIN_DOM_IN_NODE;
+ index -= node * PEM_MAX_DOM_IN_NODE;
+ res_pem->start = PEM_RES_BASE | FIELD_PREP(PEM_NODE_MASK, node) |
+ FIELD_PREP(PEM_INDX_MASK, index);
+ res_pem->end = res_pem->start + SZ_16M - 1;
+ res_pem->flags = IORESOURCE_MEM;
+}
+
static int thunder_pem_acpi_init(struct pci_config_window *cfg)
{
struct device *dev = cfg->parent;
@@ -332,9 +377,16 @@ static int thunder_pem_acpi_init(struct
return -ENOMEM;

ret = acpi_get_rc_resources(dev, "CAVA02B", root->segment, res_pem);
+
+ /*
+ * If we fail to gather resources it means that we run with old
+ * FW where we need to calculate PEM-specific resources manually.
+ */
if (ret) {
- dev_err(dev, "can't get rc base address\n");
- return ret;
+ thunder_pem_legacy_fw(root, res_pem);
+ /* Reserve PEM-specific resources and PCI configuration space */
+ thunder_pem_reserve_range(dev, root->segment, res_pem);
+ thunder_pem_reserve_range(dev, root->segment, &cfg->res);
}

return thunder_pem_init(dev, cfg, res_pem);

\
 
 \ /
  Last update: 2017-04-10 19:12    [W:1.221 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site