lkml.org 
[lkml]   [2017]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] dt-bindings: mtd: Add Octal SPI support to Cadence QSPI.
Date
This patch updates Cadence QSPI Device Tree documentation to include
information about new property used to indicate, whether or not
Octal SPI transfers are supported by the device.

Signed-off-by: Artur Jedrysek <jartur@cadence.com>
---
Documentation/devicetree/bindings/mtd/cadence-quadspi.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
index f248056..8438184 100644
--- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
@@ -14,6 +14,9 @@ Required properties:

Optional properties:
- cdns,is-decoded-cs : Flag to indicate whether decoder is used or not.
+- cdns,octal-controller : Flag to indicate, that used controller supports Octal
+ SPI transfer mode. May be intentionally omitted to
+ switch it back to Quad SPI mode.

Optional subnodes:
Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
@@ -44,6 +47,7 @@ Example:
cdns,fifo-depth = <128>;
cdns,fifo-width = <4>;
cdns,trigger-address = <0x00000000>;
+ #cdns,octal-controller

flash0: n25q00@0 {
...
--
2.2.2
\
 
 \ /
  Last update: 2017-03-06 15:15    [W:0.023 / U:2.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site