lkml.org 
[lkml]   [2017]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFT PATCH 0/6] pinctrl: meson: Fix gpio-ranged for GPIO Hog
Date
Whem trying to add a gpio hog to enable the USB Hub on the Odroid-C2, I
encountered a strange bug where when calling gpiochip_add_data() the gpiolib
code was trying to add the Hog but failed because the gpio ranges were missing.

In the meson-pinctrl driver, the gpio ranges are added manually /after/ the
call to gpiochip_add_data().
The arch/arm meson8 and meson8b patches has not been tested, this is why this
patchset is an RFT.

So this patchset uses the DT gpio-ranges attribute instead and solves the issue.

The final patch is the actual GPIO Hog for the Odroid-C2 board, which is an ugly
hack but is necessary to have USB Ports working on the board until the generic
power sequence framework is merged.

Neil Armstrong (6):
ARM64: dts: meson-gxbb: Add gpio-ranges properties
ARM64: dts: meson-gxl: Add gpio-ranges properties
ARM: dts: meson8: Add gpio-ranges properties
ARM: dts: meson8b: Add gpio-ranges properties
pinctrl: meson: use gpio-ranges from DT
ARM64: dts: meson-gxbb: Add USB Hub GPIO hog

arch/arm/boot/dts/meson8.dtsi | 2 ++
arch/arm/boot/dts/meson8b.dtsi | 2 ++
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 15 +++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 ++
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 ++
drivers/pinctrl/meson/pinctrl-meson.c | 14 +-------------
6 files changed, 24 insertions(+), 13 deletions(-)

--
1.9.1

\
 
 \ /
  Last update: 2017-03-23 17:28    [W:0.210 / U:0.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site