lkml.org 
[lkml]   [2017]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/7] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
Date
Currently the slope and offset values for calculating the
hot spot temperature of a particular thermal zone is part
of driver data. Pass them here instead and obtain the values
while of node parsing.

Tested for the slope and constant values on DRA7-EVM.

Keerthy (7):
ARM: DRA7: Thermal: Add slope and offset values
ARM: OMAP5: Thermal: Add slope and offset values
ARM: OMAP443x: Thermal: Add slope and offset values
ARM: OMAP4460: Thermal: Add slope and offset values
thermal: ti-soc-thermal: Fetch slope and offset from DT
thermal: ti-soc-thermal: Remove redundant constants
thermal: ti-soc-thermal: Remove redundant code

arch/arm/boot/dts/dra7.dtsi | 17 +++
arch/arm/boot/dts/omap443x.dtsi | 4 +
arch/arm/boot/dts/omap4460.dtsi | 4 +
arch/arm/boot/dts/omap5.dtsi | 9 ++
.../thermal/ti-soc-thermal/dra752-thermal-data.c | 10 --
.../thermal/ti-soc-thermal/omap4-thermal-data.c | 4 -
.../thermal/ti-soc-thermal/omap5-thermal-data.c | 4 -
drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 164 ++-------------------
8 files changed, 45 insertions(+), 171 deletions(-)

--
1.9.1

\
 
 \ /
  Last update: 2017-03-01 12:04    [W:0.123 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site