lkml.org 
[lkml]   [2017]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: dwc3: of-simple: fix missing clk_disable_unprepare
Date
If of_clk_get() fails, the clean-up of already initialized clocks should be
the same as when clk_prepare_enable() fails. Thus a clk_disable_unprepare()
for each clock should be called before the clk_put().

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 16adc674d0d6 ("usb: dwc3: ep0: fix setup_packet_pending initialization")

Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at>
---
NOTE: This was only compile-tested

drivers/usb/dwc3/dwc3-of-simple.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index c4a4d7bd2766..762370dd7c75 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -51,8 +51,10 @@ static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)

clk = of_clk_get(np, i);
if (IS_ERR(clk)) {
- while (--i >= 0)
+ while (--i >= 0) {
+ clk_disable_unprepare(simple->clks[i]);
clk_put(simple->clks[i]);
+ }
return PTR_ERR(clk);
}

--
2.11.0
\
 
 \ /
  Last update: 2017-12-07 11:33    [W:0.037 / U:1.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site