lkml.org 
[lkml]   [2017]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8] arm64: dts: meson-axg: switch uart_ao clock to CLK81
Date
Switch the uart_ao pclk to CLK81 since the clock driver is ready.

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>

---
This is a fixup for the previous version

Changes in v8 since [1]
- move clock DT info into soc.dtsi

[1]
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005741.html
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 01beb211f442..d1f8043be426 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>

/ {
compatible = "amlogic,meson-axg";
@@ -200,7 +201,7 @@
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
+ clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
@@ -209,7 +210,7 @@
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x4000 0x0 0x18>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
+ clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
--
2.15.1
\
 
 \ /
  Last update: 2017-12-15 15:18    [W:0.044 / U:0.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site