lkml.org 
[lkml]   [2017]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 15/23] drm/sun4i: Add LVDS support
On Tue, Oct 17, 2017 at 11:06:22AM +0200, Maxime Ripard wrote:
> The TCON supports the LVDS interface to output to a panel or a bridge.
> Let's add support for it.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
> drivers/gpu/drm/sun4i/Makefile | 1 +-
> drivers/gpu/drm/sun4i/sun4i_lvds.c | 183 ++++++++++++++++++++++++++++-
> drivers/gpu/drm/sun4i/sun4i_lvds.h | 18 +++-
> drivers/gpu/drm/sun4i/sun4i_tcon.c | 193 +++++++++++++++++++++++++++++-
> drivers/gpu/drm/sun4i/sun4i_tcon.h | 25 ++++-
> 5 files changed, 419 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_lvds.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_lvds.h
>
> diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
> index cfba2c07519c..6fee15d016ef 100644
> --- a/drivers/gpu/drm/sun4i/Makefile
> +++ b/drivers/gpu/drm/sun4i/Makefile
> @@ -10,6 +10,7 @@ sun4i-drm-hdmi-y += sun4i_hdmi_tmds_clk.o
>
> sun4i-tcon-y += sun4i_tcon.o
> sun4i-tcon-y += sun4i_rgb.o
> +sun4i-tcon-y += sun4i_lvds.o
> sun4i-tcon-y += sun4i_dotclock.o
> sun4i-tcon-y += sun4i_crtc.o

[...]

> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index 3efa1ab045cd..6a20a467ee6d 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -31,10 +31,52 @@
> #include "sun4i_crtc.h"
> #include "sun4i_dotclock.h"
> #include "sun4i_drv.h"
> +#include "sun4i_lvds.h"
> #include "sun4i_rgb.h"
> #include "sun4i_tcon.h"
> #include "sunxi_engine.h"

[...]

> static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel,
> bool enabled)
> {
> @@ -69,9 +111,13 @@ void sun4i_tcon_set_status(struct sun4i_tcon *tcon,
> const struct drm_encoder *encoder,
> bool enabled)
> {
> + bool is_lvds = false;
> int channel;
>
> switch (encoder->encoder_type) {
> + case DRM_MODE_ENCODER_LVDS:
> + is_lvds = true;
> + /* Fallthrough */
> case DRM_MODE_ENCODER_NONE:
> channel = 0;
> break;
> @@ -84,10 +130,47 @@ void sun4i_tcon_set_status(struct sun4i_tcon *tcon,
> return;
> }
>
> + if (is_lvds && !enabled)
> + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG,
> + SUN4I_TCON0_LVDS_IF_EN, 0);
> +
> regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
> SUN4I_TCON_GCTL_TCON_ENABLE,
> enabled ? SUN4I_TCON_GCTL_TCON_ENABLE : 0);
>
> + if (is_lvds && enabled) {
> + u8 val;
> +
> + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG,
> + SUN4I_TCON0_LVDS_IF_EN,
> + SUN4I_TCON0_LVDS_IF_EN);
> +

OK, this part below seems to be quite A83T specific, as A10/A20
has different register bits.

For example ANA0 bits:

A10:
#define SUN4I_TCON0_LVDS_ANA0_EN_MB BIT(22)

But here it is:
#define SUN4I_TCON0_LVDS_ANA0_EN_MB BIT(31)


Also, the programming sequence for A10/A20 (from u-boot),
and my initial patchset. (I haven't yet had time to get output working
on top of your stuff).

1. Set ANA0 (0x220)
2. Set ANA1
3. Update ANA1

regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
SUN4I_TCON0_LVDS_ANA0_CK_EN |
SUN4I_TCON0_LVDS_ANA0_REG_V |
SUN4I_TCON0_LVDS_ANA0_REG_C |
SUN4I_TCON0_LVDS_ANA0_EN_MB |
SUN4I_TCON0_LVDS_ANA0_PD |
SUN4I_TCON0_LVDS_ANA0_DCHS);

udelay(2000);

regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA1_REG,
SUN4I_TCON0_LVDS_ANA1_INIT);

udelay(1000);

regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA1_REG,
SUN4I_TCON0_LVDS_ANA1_UPDATE,
SUN4I_TCON0_LVDS_ANA1_UPDATE);


> + regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> + SUN4I_TCON0_LVDS_ANA0_C(2) |
> + SUN4I_TCON0_LVDS_ANA0_V(3) |
> + SUN4I_TCON0_LVDS_ANA0_PD(2) |
> + SUN4I_TCON0_LVDS_ANA0_EN_LDO);
> + udelay(2);
> +
> + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> + SUN4I_TCON0_LVDS_ANA0_EN_MB,
> + SUN4I_TCON0_LVDS_ANA0_EN_MB);
> + udelay(2);
> +
> + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> + SUN4I_TCON0_LVDS_ANA0_EN_DRVC,
> + SUN4I_TCON0_LVDS_ANA0_EN_DRVC);
> +
> + if (sun4i_tcon_get_pixel_depth(encoder) == 18)
> + val = 7;
> + else
> + val = 0xf;
> +
> + regmap_write_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> + SUN4I_TCON0_LVDS_ANA0_EN_DRVD(0xf),
> + SUN4I_TCON0_LVDS_ANA0_EN_DRVD(val));
> + }
> +
> sun4i_tcon_channel_set_status(tcon, channel, enabled);
> }
>
> @@ -170,6 +253,78 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
> SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
> }
>
> +static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
> + const struct drm_encoder *encoder,
> + const struct drm_display_mode *mode)
> +{
> + unsigned int bp;
> + u8 clk_delay;
> + u32 reg, val = 0;
> +
> + tcon->dclk_min_div = 7;
> + tcon->dclk_max_div = 7;
> + sun4i_tcon0_mode_set_common(tcon, mode);
> +
> + /* Adjust clock delay */
> + clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
> + regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
> + SUN4I_TCON0_CTL_CLK_DELAY_MASK,
> + SUN4I_TCON0_CTL_CLK_DELAY(clk_delay));
> +
> + /*
> + * This is called a backporch in the register documentation,
> + * but it really is the back porch + hsync
> + */
> + bp = mode->crtc_htotal - mode->crtc_hsync_start;
> + DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
> + mode->crtc_htotal, bp);
> +
> + /* Set horizontal display timings */
> + regmap_write(tcon->regs, SUN4I_TCON0_BASIC1_REG,
> + SUN4I_TCON0_BASIC1_H_TOTAL(0x554) |
> + SUN4I_TCON0_BASIC1_H_BACKPORCH(0xa0));
> +
> + /*
> + * This is called a backporch in the register documentation,
> + * but it really is the back porch + hsync
> + */
> + bp = mode->crtc_vtotal - mode->crtc_vsync_start;
> + DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
> + mode->crtc_vtotal, bp);
> +
> + /* Set vertical display timings */
> + regmap_write(tcon->regs, SUN4I_TCON0_BASIC2_REG,
> + SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) |
> + SUN4I_TCON0_BASIC2_V_BACKPORCH(0x17));
> +
> + reg = SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 |
> + SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL |
> + SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL;
> + if (sun4i_tcon_get_pixel_depth(encoder) == 24)
> + reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS;
> + else
> + reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_18BITS;
> +
> + regmap_write(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, reg);
> +
> + /* Setup the polarity of the various signals */
> + if (!(mode->flags & DRM_MODE_FLAG_PHSYNC))
> + val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE;
> +
> + if (!(mode->flags & DRM_MODE_FLAG_PVSYNC))
> + val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
> +
> + regmap_write(tcon->regs, SUN4I_TCON0_IO_POL_REG, 0);
> +
> + /* Map output pins to channel 0 */
> + regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
> + SUN4I_TCON_GCTL_IOMAP_MASK,
> + SUN4I_TCON_GCTL_IOMAP_TCON0);
> +
> + /* Enable the output on the pins */
> + regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0xe0000000);
> +}
> +
> static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
> const struct drm_display_mode *mode)
> {
> @@ -336,6 +491,9 @@ void sun4i_tcon_mode_set(struct sun4i_tcon *tcon,
> const struct drm_display_mode *mode)
> {
> switch (encoder->encoder_type) {
> + case DRM_MODE_ENCODER_LVDS:
> + sun4i_tcon0_mode_set_lvds(tcon, encoder, mode);
> + break;
> case DRM_MODE_ENCODER_NONE:
> sun4i_tcon0_mode_set_rgb(tcon, mode);
> sun4i_tcon_set_mux(tcon, 0, encoder);
> @@ -667,7 +825,9 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
> struct drm_device *drm = data;
> struct sun4i_drv *drv = drm->dev_private;
> struct sunxi_engine *engine;
> + struct device_node *remote;
> struct sun4i_tcon *tcon;
> + bool has_lvds;
> int ret;
>
> engine = sun4i_tcon_find_engine(drv, dev->of_node);
> @@ -698,6 +858,26 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
> return ret;
> }
>
> + /*
> + * This can only be made optional since we've had DT nodes
> + * without the LVDS reset properties.
> + *
> + * If the property is missing, just disable LVDS, and print a
> + * warning.
> + */
> + tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds");
> + if (IS_ERR(tcon->lvds_rst)) {
> + dev_err(dev, "Couldn't get our reset line\n");
> + return PTR_ERR(tcon->lvds_rst);
> + } else if (tcon->lvds_rst) {
> + has_lvds = true;
> + reset_control_reset(tcon->lvds_rst);
> + } else {
> + has_lvds = false;
> + dev_warn(dev,
> + "Missing LVDS reset property, you should consider upgrading your DT\n");
> + }
> +
> ret = sun4i_tcon_init_clocks(dev, tcon);
> if (ret) {
> dev_err(dev, "Couldn't init our TCON clocks\n");
> @@ -729,7 +909,18 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
> goto err_free_clocks;
> }
>
> - ret = sun4i_rgb_init(drm, tcon);
> + /*
> + * If we have an LVDS panel connected to the TCON, we should
> + * just probe the LVDS connector. Otherwise, just probe RGB as
> + * we used to.
> + */
> + remote = of_graph_get_remote_node(dev->of_node, 1, 0);
> + if (has_lvds && of_device_is_compatible(remote, "panel-lvds"))
> + ret = sun4i_lvds_init(drm, tcon);
> + else
> + ret = sun4i_rgb_init(drm, tcon);
> + of_node_put(remote);
> +
> if (ret < 0)
> goto err_free_clocks;
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h
> index 4141fbd97ddf..382689e5396e 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
> @@ -70,7 +70,21 @@
> #define SUN4I_TCON0_TTL2_REG 0x78
> #define SUN4I_TCON0_TTL3_REG 0x7c
> #define SUN4I_TCON0_TTL4_REG 0x80
> +
> #define SUN4I_TCON0_LVDS_IF_REG 0x84
> +#define SUN4I_TCON0_LVDS_IF_EN BIT(31)
> +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_MASK BIT(26)
> +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_18BITS (1 << 26)
> +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS (0 << 26)
> +#define SUN4I_TCON0_LVDS_IF_CLK_SEL_MASK BIT(20)
> +#define SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 (1 << 20)
> +#define SUN4I_TCON0_LVDS_IF_CLK_POL_MASK BIT(4)
> +#define SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL (1 << 4)
> +#define SUN4I_TCON0_LVDS_IF_CLK_POL_INV (0 << 4)
> +#define SUN4I_TCON0_LVDS_IF_DATA_POL_MASK GENMASK(3, 0)
> +#define SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL (0xf)
> +#define SUN4I_TCON0_LVDS_IF_DATA_POL_INV (0)
> +
> #define SUN4I_TCON0_IO_POL_REG 0x88
> #define SUN4I_TCON0_IO_POL_DCLK_PHASE(phase) ((phase & 3) << 28)
> #define SUN4I_TCON0_IO_POL_HSYNC_POSITIVE BIT(25)
> @@ -131,6 +145,16 @@
> #define SUN4I_TCON_CEU_RANGE_G_REG 0x144
> #define SUN4I_TCON_CEU_RANGE_B_REG 0x148
> #define SUN4I_TCON_MUX_CTRL_REG 0x200
> +
> +#define SUN4I_TCON0_LVDS_ANA0_REG 0x220

Although register address is same as A10/A20, its contents
seem to be different here...

> +#define SUN4I_TCON0_LVDS_ANA0_EN_MB BIT(31)
> +#define SUN4I_TCON0_LVDS_ANA0_EN_LDO BIT(30)
> +#define SUN4I_TCON0_LVDS_ANA0_EN_DRVC BIT(24)
> +#define SUN4I_TCON0_LVDS_ANA0_EN_DRVD(x) (((x) & 0xf) << 20)
> +#define SUN4I_TCON0_LVDS_ANA0_C(x) (((x) & 3) << 17)
> +#define SUN4I_TCON0_LVDS_ANA0_V(x) (((x) & 3) << 8)
> +#define SUN4I_TCON0_LVDS_ANA0_PD(x) (((x) & 3) << 4)
> +
> #define SUN4I_TCON1_FILL_CTL_REG 0x300
> #define SUN4I_TCON1_FILL_BEG0_REG 0x304
> #define SUN4I_TCON1_FILL_END0_REG 0x308
> @@ -174,6 +198,7 @@ struct sun4i_tcon {
>
> /* Reset control */
> struct reset_control *lcd_rst;
> + struct reset_control *lvds_rst;
>
> struct drm_panel *panel;
>
> --
> git-series 0.9.1

\
 
 \ /
  Last update: 2017-10-23 22:17    [W:0.170 / U:0.096 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site