lkml.org 
[lkml]   [2017]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/3] dt: bindings: add thermal device driver for zx2967
Date
This patch adds dt-binding documentation for zx2967 family thermal sensor.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
---
.../devicetree/bindings/thermal/zx2967-thermal.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/zx2967-thermal.txt

diff --git a/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
new file mode 100644
index 0000000..2633964
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
@@ -0,0 +1,22 @@
+* ZTE zx2967 family Thermal
+
+Required Properties:
+- compatible: should be one of the following.
+ * zte,zx2967-thermal
+ * zte,zx296718-thermal
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- clocks : Pairs of phandle and specifier referencing the controller's clocks.
+- clock-names: "tempsensor_gate" for the topcrm clock.
+ "tempsensor_pclk" for the apb clock.
+- #thermal-sensor-cells: must be 0.
+
+Example:
+
+ tempsensor: tempsensor@148a000 {
+ compatible = "zte,zx2967-thermal";
+ reg = <0x0148a000 0x20>;
+ clocks = <&topcrm TEMPSENSOR_GATE>, <&audiocrm AUDIO_TS_PCLK>;
+ clock-names = "tempsensor_gate", "tempsensor_pclk";
+ #thermal-sensor-cells = <0>;
+ };
--
2.7.4
\
 
 \ /
  Last update: 2017-01-07 06:39    [W:0.108 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site