Messages in this thread Patch in this message | | | From | Peter Ujfalusi <> | Subject | [PATCH v2] mmc: omap_hsmmc: Initialize dma_slave_config to avoid random data | Date | Wed, 14 Sep 2016 14:22:07 +0300 |
| |
It is wrong to use uninitialized dma_slave_config and configure only certain fields as the DMAengine driver might look at non initialized (random data) fields and tries to interpret it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- Hi,
Changes since v1: - do the field initialization in one step
would it be possible to send this patch for 4.8? I have omap-dma DMAengine driver changes pending, but they break the MMC/SD because of the uninitialized fields in dma_slave_config.
Thanks, Peter
drivers/mmc/host/omap_hsmmc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 24ebc9a8de89..5f2f24a7360d 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1409,11 +1409,18 @@ static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host, static int omap_hsmmc_setup_dma_transfer(struct omap_hsmmc_host *host, struct mmc_request *req) { - struct dma_slave_config cfg; struct dma_async_tx_descriptor *tx; int ret = 0, i; struct mmc_data *data = req->data; struct dma_chan *chan; + struct dma_slave_config cfg = { + .src_addr = host->mapbase + OMAP_HSMMC_DATA, + .dst_addr = host->mapbase + OMAP_HSMMC_DATA, + .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .src_maxburst = data->blksz / 4, + .dst_maxburst = data->blksz / 4, + };
/* Sanity check: all the SG entries must be aligned by block size. */ for (i = 0; i < data->sg_len; i++) { @@ -1433,13 +1440,6 @@ static int omap_hsmmc_setup_dma_transfer(struct omap_hsmmc_host *host,
chan = omap_hsmmc_get_dma_chan(host, data);
- cfg.src_addr = host->mapbase + OMAP_HSMMC_DATA; - cfg.dst_addr = host->mapbase + OMAP_HSMMC_DATA; - cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - cfg.src_maxburst = data->blksz / 4; - cfg.dst_maxburst = data->blksz / 4; - ret = dmaengine_slave_config(chan, &cfg); if (ret) return ret; -- 2.10.0
| |