lkml.org 
[lkml]   [2016]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/2] Add ability to configure ethernet h/w shaper
From
Date
Please, ignore it
It was sent by mistake

On 05.08.16 00:11, Ivan Khoronzhuk wrote:
> These two patches can be used to set per queue bandwidth with ethtool.
> I've create them as logical continuation of patchset from intel,
> that have introduced per-queue setting command month ago for ethtool
> interface
> (http://kernel.opensuse.org/cgit/kernel-source/commit/?h=rpm-4.4.9-36&
> id=feaab26abfffe381fb4c8c10d2762a753d481c6c). Actually I've not tested this
> interface and planning to send it in parallel with
> "net: ethernet: ti: cpsw: add multi-queue support"
> (https://lkml.org/lkml/2016/6/30/603), as it contains only changes to
> ethtool interface.
>
> First patch can be used to set per-channel bandwidth, second to tune
> number of per-channel descriptors. It can solve issues described by
> Schuyler. In case if per-channel bandwidth is equal to maximum
> for every channel, the driver could be switched to priority mode.
>
> Ivan Khoronzhuk (2):
> net: core: ethtool: add per queue bandwidth command
> net: core: ethtool: add ringparam perqueue command
>
> include/linux/ethtool.h | 8 ++
> include/uapi/linux/ethtool.h | 2 +
> net/core/ethtool.c | 206 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 216 insertions(+)
>

--
Regards,
Ivan Khoronzhuk

\
 
 \ /
  Last update: 2016-08-05 00:01    [W:0.188 / U:0.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site