lkml.org 
[lkml]   [2016]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] Add ability to configure ethernet h/w shaper
Date
These two patches can be used to set per queue bandwidth with ethtool.
I've create them as logical continuation of patchset from intel,
that have introduced per-queue setting command month ago for ethtool
interface
(http://kernel.opensuse.org/cgit/kernel-source/commit/?h=rpm-4.4.9-36&
id=feaab26abfffe381fb4c8c10d2762a753d481c6c). Actually I've not tested this
interface and planning to send it in parallel with
"net: ethernet: ti: cpsw: add multi-queue support"
(https://lkml.org/lkml/2016/6/30/603), as it contains only changes to
ethtool interface.

First patch can be used to set per-channel bandwidth, second to tune
number of per-channel descriptors. It can solve issues described by
Schuyler. In case if per-channel bandwidth is equal to maximum
for every channel, the driver could be switched to priority mode.

Ivan Khoronzhuk (2):
net: core: ethtool: add per queue bandwidth command
net: core: ethtool: add ringparam perqueue command

include/linux/ethtool.h | 8 ++
include/uapi/linux/ethtool.h | 2 +
net/core/ethtool.c | 206 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 216 insertions(+)

--
1.9.1

\
 
 \ /
  Last update: 2016-08-05 00:01    [W:0.060 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site