lkml.org 
[lkml]   [2016]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] hwmon: (max6650.c) Add devicetree support documentation
Date
This adds the devicetree binding documentation for the max6650 fan
controller.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
---
v2: Allow only 12V or 5V supply voltage
.../devicetree/bindings/hwmon/max6650.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/max6650.txt

diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt
new file mode 100644
index 0000000..d6c10e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/max6650.txt
@@ -0,0 +1,23 @@
+Bindings for MAX6651 and MAX6650 I2C fan controllers
+
+Reference:
+[1] https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
+
+Required properties:
+- compatible : One of "maxim,max6650" or "maxim,max6651"
+- reg : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48.
+
+Optional properties, default is to retain the chip's current setting:
+- maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or
+ 12000000 uV.
+- maxim,fan-prescale : Pre-scaling value, as per datasheet [1]. Lower values
+ allow more fine-grained control of slower fans.
+ Valid: 1, 2, 4, 8, 16.
+
+Example:
+ fan-max6650: max6650@1b {
+ reg = <0x1b>;
+ compatible = "maxim,max6650";
+ maxim,fan-microvolt = <12000000>;
+ maxim,fan-prescale = <4>;
+ };
--
1.9.1
\
 
 \ /
  Last update: 2016-09-17 09:57    [W:2.323 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site