[lkml]   [2016]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH V2 03/10] Documentation: dt-bindings: firmware: tegra: add bindings of the BPMP
On 07/05/2016 03:04 AM, Joseph Lo wrote:
> The BPMP is a specific processor in Tegra chip, which is designed for
> booting process handling and offloading the power management, clock
> management, and reset control tasks from the CPU. The binding document
> defines the resources that would be used by the BPMP firmware driver,
> which can create the interprocessor communication (IPC) between the CPU
> and BPMP.

> diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt

> +- Documentation/devicetree/bindings/mailbox/mailbox.txt
> +- Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt

> +- Documentation/devicetree/bindings/clock/clock-bindings.txt
> +- include/dt-bindings/clock/tegra186-clock.h
> +- Documentation/devicetree/bindings/reset/reset.txt
> +- include/dt-bindings/reset/tegra186-reset.h

If you end up needing to repost this, it would be nice to make all those
file references more generic. In particular, some SW projects store
binding docs somewhere other than Documentation/devicetree/bindings/
(e.g. U-Boot uses doc/device-tree-bindings/), and it's possible that the
header files aren't stored in include/ but somewhere else. To make these
file references valid everywhere, I'd suggest using relative paths for
the binding docs, and #include style paths for the headers, e.g.:



 \ /
  Last update: 2016-07-13 22:21    [W:0.160 / U:21.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site