lkml.org 
[lkml]   [2016]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V2 03/10] Documentation: dt-bindings: firmware: tegra: add bindings of the BPMP
On Tue, Jul 5, 2016 at 6:04 PM, Joseph Lo <josephl@nvidia.com> wrote:
> The BPMP is a specific processor in Tegra chip, which is designed for
> booting process handling and offloading the power management, clock
> management, and reset control tasks from the CPU. The binding document
> defines the resources that would be used by the BPMP firmware driver,
> which can create the interprocessor communication (IPC) between the CPU
> and BPMP.
>
> Signed-off-by: Joseph Lo <josephl@nvidia.com>
> ---
> Changes in V2:
> - update the message that the BPMP is clock and reset control provider
> - add tegra186-clock.h and tegra186-reset.h header files
> - revise the description of the required properties
> ---
> .../bindings/firmware/nvidia,tegra186-bpmp.txt | 77 ++
> include/dt-bindings/clock/tegra186-clock.h | 940 +++++++++++++++++++++
> include/dt-bindings/reset/tegra186-reset.h | 217 +++++
> 3 files changed, 1234 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
> create mode 100644 include/dt-bindings/clock/tegra186-clock.h
> create mode 100644 include/dt-bindings/reset/tegra186-reset.h
>
> diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
> new file mode 100644
> index 000000000000..4d0b6eba56c5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
> @@ -0,0 +1,77 @@
> +NVIDIA Tegra Boot and Power Management Processor (BPMP)
> +
> +The BPMP is a specific processor in Tegra chip, which is designed for
> +booting process handling and offloading the power management, clock
> +management, and reset control tasks from the CPU. The binding document
> +defines the resources that would be used by the BPMP firmware driver,
> +which can create the interprocessor communication (IPC) between the CPU
> +and BPMP.
> +
> +Required properties:
> +- name : Should be bpmp
> +- compatible
> + Array of strings
> + One of:
> + - "nvidia,tegra186-bpmp"
> +- mboxes : The phandle of mailbox controller and the mailbox specifier.
> +- shmem : List of the phandle of the TX and RX shared memory area that
> + the IPC between CPU and BPMP is based on.
> +- #clock-cells : Should be 1.
> +- #reset-cells : Should be 1.
> +
> +This node is a mailbox consumer. See the following files for details of
> +the mailbox subsystem, and the specifiers implemented by the relevant
> +provider(s):
> +
> +- Documentation/devicetree/bindings/mailbox/mailbox.txt
> +- Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
> +
> +This node is a clock and reset provider. See the following files for
> +general documentation of those features, and the specifiers implemented
> +by this node:
> +
> +- Documentation/devicetree/bindings/clock/clock-bindings.txt
> +- include/dt-bindings/clock/tegra186-clock.h
> +- Documentation/devicetree/bindings/reset/reset.txt
> +- include/dt-bindings/reset/tegra186-reset.h
> +
> +The shared memory bindings for BPMP
> +-----------------------------------
> +
> +The shared memory area for the IPC TX and RX between CPU and BPMP are
> +predefined and work on top of sysram, which is an SRAM inside the chip.
> +
> +See "Documentation/devicetree/bindings/sram/sram.txt" for the bindings.
> +
> +Example:
> +
> +hsp_top0: hsp@03c00000 {
> + ...
> + #mbox-cells = <1>;
> +};
> +
> +sysram@30000000 {
> + compatible = "nvidia,tegra186-sysram", "mmio-ram";

Shouldn't the second compatible be "mmio-sram"?

If so, then you have the same typo in tegra186.dtsi as well.

\
 
 \ /
  Last update: 2016-07-06 14:21    [W:0.249 / U:1.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site