lkml.org 
[lkml]   [2016]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] [PATCH 13/14] ARM: dts: sun8i: Add gpio-regulator used on Orange Pi One
Hi Ondrej,

On Fri, Jun 24, 2016 at 5:21 AM, <megous@megous.com> wrote:
> From: Ondrej Jirman <megous@megous.com>
>
> Xulong Orange Pi One uses GPIO based regulator that
> switches between two voltages: 1.1V and 1.3V. The
> regulator is controlled from the PL6 pin.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>
> ---
> arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
> index 0adf932..ce4ba91 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
> @@ -88,6 +88,25 @@
> gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
> };
> };
> +
> + vdd_soc: gpio-regulator {
> + compatible = "regulator-gpio";
> +
> + regulator-name = "soc-vdd-supply";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-boot-on;
> + regulator-type = "voltage";
> +
> + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
> + states = <1100000 0x0
> + 1300000 0x1>;
> +
> + startup-delay-us = <100000>;
> + enable-active-high;
> + };
> +};
> +

Also, isn't adding another closing bracket here a syntax error?

> };

Thanks,

--
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

\
 
 \ /
  Last update: 2016-06-24 05:21    [W:0.055 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site