lkml.org 
[lkml]   [2016]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] usb: dwc2: Add support for STM32F429/439/469 USB OTG in FS mode with internal PHY
Date
Signed-off-by: Bruno Herrera <bruherrera@gmail.com>
---
drivers/usb/dwc2/core.c | 18 ++++++++++++++++++
drivers/usb/dwc2/core.h | 5 +++++
drivers/usb/dwc2/hcd.c | 12 +++++++++++-
drivers/usb/dwc2/hw.h | 2 ++
drivers/usb/dwc2/platform.c | 37 +++++++++++++++++++++++++++++++++++++
5 files changed, 73 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 4135a5f..83fbed6 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -1276,6 +1276,23 @@ static void dwc2_set_param_hibernation(struct dwc2_hsotg *hsotg,
hsotg->core_params->hibernation = val;
}

+static void dwc2_set_param_stm32_powerdown(struct dwc2_hsotg *hsotg,
+ int val)
+{
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev,
+ "'%d' invalid for parameter power down\n",
+ val);
+ dev_err(hsotg->dev, "power down must be 0 or 1\n");
+ }
+ val = 0;
+ dev_dbg(hsotg->dev, "Setting power down to %d\n", val);
+ }
+
+ hsotg->core_params->stm32_powerdown = val;
+}
+
/*
* This function is called during module intialization to pass module parameters
* for the DWC_otg core.
@@ -1323,6 +1340,7 @@ void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
dwc2_set_param_uframe_sched(hsotg, params->uframe_sched);
dwc2_set_param_external_id_pin_ctl(hsotg, params->external_id_pin_ctl);
dwc2_set_param_hibernation(hsotg, params->hibernation);
+ dwc2_set_param_stm32_powerdown(hsotg, params->stm32_powerdown);
}

/*
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 3c58d63..d3e4fcb 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -386,6 +386,10 @@ enum dwc2_ep0_state {
* needed.
* 0 - No (default)
* 1 - Yes
+ * @stm32_powerdown: Enable STM32 specific USB FS transceiver power down
+ * control.
+ * 0 = USB FS transceiver disabled (default)
+ * 1 = USB FS transceiver enabled
*
* The following parameters may be specified when starting the module. These
* parameters define how the DWC_otg controller should be configured. A
@@ -426,6 +430,7 @@ struct dwc2_core_params {
int uframe_sched;
int external_id_pin_ctl;
int hibernation;
+ int stm32_powerdown;
};

/**
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 2df3d04..4f9bb93 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -118,7 +118,7 @@ static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)

static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
{
- u32 usbcfg, i2cctl;
+ u32 usbcfg, usbgpio, i2cctl;
int retval = 0;

/*
@@ -142,6 +142,16 @@ static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
return retval;
}
}
+
+ if (hsotg->core_params->stm32_powerdown > 0) {
+ dev_dbg(hsotg->dev, "STM32 FS PHY enabling transceiver\n");
+ /* STM32 uses the GGPIO register as general core
+ * configuration register.
+ */
+ usbgpio = dwc2_readl(hsotg->regs + GGPIO);
+ usbgpio |= STM32_OTG_GCCFG_PWRDWN;
+ dwc2_writel(usbgpio, hsotg->regs + GGPIO);
+ }
}

/*
diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
index 281b57b..d5f9294 100644
--- a/drivers/usb/dwc2/hw.h
+++ b/drivers/usb/dwc2/hw.h
@@ -224,6 +224,8 @@

#define GPVNDCTL HSOTG_REG(0x0034)
#define GGPIO HSOTG_REG(0x0038)
+#define STM32_OTG_GCCFG_PWRDWN (1 << 16)
+
#define GUID HSOTG_REG(0x003c)
#define GSNPSID HSOTG_REG(0x0040)
#define GHWCFG1 HSOTG_REG(0x0044)
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index fc6f525..d806b94 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -84,6 +84,7 @@ static const struct dwc2_core_params params_hi6220 = {
.uframe_sched = 0,
.external_id_pin_ctl = -1,
.hibernation = -1,
+ .stm32_powerdown = 0,
};

static const struct dwc2_core_params params_bcm2835 = {
@@ -115,6 +116,7 @@ static const struct dwc2_core_params params_bcm2835 = {
.uframe_sched = 0,
.external_id_pin_ctl = -1,
.hibernation = -1,
+ .stm32_powerdown = 0,
};

static const struct dwc2_core_params params_rk3066 = {
@@ -147,6 +149,7 @@ static const struct dwc2_core_params params_rk3066 = {
.uframe_sched = -1,
.external_id_pin_ctl = -1,
.hibernation = -1,
+ .stm32_powerdown = 0,
};

static const struct dwc2_core_params params_ltq = {
@@ -179,6 +182,39 @@ static const struct dwc2_core_params params_ltq = {
.uframe_sched = -1,
.external_id_pin_ctl = -1,
.hibernation = -1,
+ .stm32_powerdown = 0,
+};
+
+static const struct dwc2_core_params params_stm32fs = {
+ .otg_cap = 2, /* non-HNP/non-SRP */
+ .otg_ver = -1,
+ .dma_enable = 0,
+ .dma_desc_enable = 0,
+ .dma_desc_fs_enable = 0,
+ .speed = 1, /* Full Speed */
+ .enable_dynamic_fifo = -1,
+ .en_multiple_tx_fifo = -1,
+ .host_rx_fifo_size = 128, /* 128 DWORDs */
+ .host_nperio_tx_fifo_size = 96, /* 96 DWORDs */
+ .host_perio_tx_fifo_size = 96, /* 96 DWORDs */
+ .max_transfer_size = -1,
+ .max_packet_count = 256,
+ .host_channels = -1,
+ .phy_type = 0, /* Full Speed PHY */
+ .phy_utmi_width = 0,
+ .phy_ulpi_ddr = 0,
+ .phy_ulpi_ext_vbus = 0,
+ .i2c_enable = 0,
+ .ulpi_fs_ls = 0,
+ .host_support_fs_ls_low_power = 0,
+ .host_ls_low_power_phy_clk = 0,
+ .ts_dline = 0,
+ .reload_ctl = 1,
+ .ahbcfg = 0,
+ .uframe_sched = 0,
+ .external_id_pin_ctl = 0,
+ .hibernation = 0,
+ .stm32_powerdown = 1,
};

/*
@@ -464,6 +500,7 @@ static const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "lantiq,xrx200-usb", .data = &params_ltq },
{ .compatible = "snps,dwc2", .data = NULL },
{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
+ { .compatible = "st,stm32-fsotg", .data = &params_stm32fs},
{},
};
MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
--
2.7.4 (Apple Git-66)
\
 
 \ /
  Last update: 2016-06-22 04:41    [W:0.118 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site