lkml.org 
[lkml]   [2016]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4] extcon: gpio: Add the support for Device tree bindings
From
Hi Venkat,

There is some miscommunication. On previous my reply, I don't mean
that the author of the patch[1] is changed from me to you.

I'd like you to remain the original author(me) for the patch[1]
without changing the author.
[1] https://lkml.org/lkml/2015/10/21/8
- [PATCH v3] extcon: gpio: Add the support for Device tree bindings

You can use the patch[1] as based patch and you can add new feature on
base patch[1]. Also, If you ok, you can modify the extccon-gpio.c
driver as Rob comment[2].

But, Rob Herring gave me the some comment[2].
[2] https://lkml.org/lkml/2015/10/21/906


Thanks,
Chanwoo Choi


On Thu, May 26, 2016 at 8:47 PM, Venkat Reddy Talla
<vreddytalla@nvidia.com> wrote:
> Add the support for Device tree bindings of extcon-gpio driver.
> The extcon-gpio device tree node must include the both 'extcon-id' and
> 'gpios' property.
>
> For example:
> usb_cable: extcon-gpio-0 {
> compatible = "extcon-gpio";
> extcon-id = <EXTCON_USB>;
> gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
> }
> ta_cable: extcon-gpio-1 {
> compatible = "extcon-gpio";
> extcon-id = <EXTCON_CHG_USB_DCP>;
> gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> debounce-ms = <50>; /* 50 millisecond */
> wakeup-source;
> }
> &dwc3_usb {
> extcon = <&usb_cable>;
> };
> &charger {
> extcon = <&ta_cable>;
> };
>
> Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
>
> ---
> changes from v3:
> - add description for wakeup-source in documentation
> - change dts property extcon-gpio name to gpios
> - use of_get_named_gpio_flags to get gpio number and flags
> Changes from v2:
> - Add the more description for 'extcon-id' property in documentation
> Changes from v1:
> - Create the include/dt-bindings/extcon/extcon.h including the identification
> of external connector. These definitions are used in dts file.
> - Fix error if CONFIG_OF is disabled.
> - Add signed-off tag by Myungjoo Ham
> ---
> ---
> .../devicetree/bindings/extcon/extcon-gpio.txt | 48 +++++++++
> drivers/extcon/extcon-gpio.c | 109 +++++++++++++++++----
> include/dt-bindings/extcon/extcon.h | 47 +++++++++
> include/linux/extcon/extcon-gpio.h | 8 +-
> 4 files changed, 189 insertions(+), 23 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/extcon/extcon-gpio.txt
> create mode 100644 include/dt-bindings/extcon/extcon.h
>
> diff --git a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
> new file mode 100644
> index 0000000..81f7932
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
> @@ -0,0 +1,48 @@
> +GPIO Extcon device
> +
> +This is a virtual device used to generate the specific cable states from the
> +GPIO pin.
> +
> +Required properties:
> +- compatible: Must be "extcon-gpio".
> +- extcon-id: The extcon support the various type of external connector to check
> + whether connector is attached or detached. The each external connector has
> + the unique number to identify it. So this property includes the unique number
> + which indicates the specific external connector. When external connector is
> + attached or detached, GPIO pin detect the changed state. See include/
> + dt-bindings/extcon/extcon.h which defines the unique number for supported
> + external connector from extcon framework.
> +- gpios: GPIO pin to detect the external connector. See gpio binding.
> +
> +Optional properties:
> +- debounce-ms: the debounce dealy for GPIO pin in millisecond.
> +- wakeup-source: Boolean, extcon can wake-up the system from suspend.
> + if gpio provided in extcon-gpio DT node is registered as interrupt,
> + then extcon can wake-up the system from suspend if wakeup-source property
> + is available in DT node, if gpio registered as interrupt but wakeup-source
> + is not available in DT node, then system wake-up due to extcon events
> + not supported.
> +
> +Example: Examples of extcon-gpio node as listed below:
> +
> + usb_cable: extcon-gpio-0 {
> + compatible = "extcon-gpio";
> + extcon-id = <EXTCON_USB>;
> + extcon-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
> + }
> +
> + ta_cable: extcon-gpio-1 {
> + compatible = "extcon-gpio";
> + extcon-id = <EXTCON_CHG_USB_DCP>;
> + extcon-gpio = <&gpio3 2 GPIO_ACTIVE_LOW>;
> + debounce-ms = <50>; /* 50 millisecond */
> + wakeup-source;
> + }
> +
> + &dwc3_usb {
> + extcon = <&usb_cable>;
> + };
> +
> + &charger {
> + extcon = <&ta_cable>;
> + };
> diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
> index d023789..592f395 100644
> --- a/drivers/extcon/extcon-gpio.c
> +++ b/drivers/extcon/extcon-gpio.c
> @@ -1,11 +1,9 @@
> /*
> * extcon_gpio.c - Single-state GPIO extcon driver based on extcon class
> *
> - * Copyright (C) 2008 Google, Inc.
> - * Author: Mike Lockwood <lockwood@android.com>
> - *
> - * Modified by MyungJoo Ham <myungjoo.ham@samsung.com> to support extcon
> - * (originally switch class is supported)
> + * Copyright (C) 2016 Chanwoo Choi <cw00.choi@samsung.com>, Samsung Electronics
> + * Copyright (C) 2012 MyungJoo Ham <myungjoo.ham@samsung.com>, Samsung Electronics
> + * Copyright (C) 2008 Mike Lockwood <lockwood@android.com>, Google, Inc.
> *
> * This software is licensed under the terms of the GNU General Public
> * License version 2, as published by the Free Software Foundation, and
> @@ -25,13 +23,17 @@
> #include <linux/interrupt.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
> #include <linux/platform_device.h>
> +#include <linux/property.h>
> #include <linux/slab.h>
> #include <linux/workqueue.h>
>
> struct gpio_extcon_data {
> struct extcon_dev *edev;
> int irq;
> + bool irq_wakeup;
> struct delayed_work work;
> unsigned long debounce_jiffies;
>
> @@ -49,7 +51,7 @@ static void gpio_extcon_work(struct work_struct *work)
> state = gpiod_get_value_cansleep(data->id_gpiod);
> if (data->pdata->gpio_active_low)
> state = !state;
> - extcon_set_state(data->edev, state);
> + extcon_set_cable_state_(data->edev, data->pdata->extcon_id, state);
> }
>
> static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
> @@ -61,6 +63,42 @@ static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> +static int gpio_extcon_parse_of(struct platform_device *pdev,
> + struct gpio_extcon_data *data)
> +{
> + struct gpio_extcon_pdata *pdata;
> + struct device_node *np = pdev->dev.of_node;
> + enum of_gpio_flags flags;
> + int ret;
> +
> + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return -ENOMEM;
> +
> + ret = device_property_read_u32(&pdev->dev, "extcon-id",
> + &pdata->extcon_id);
> + if (ret < 0)
> + return -EINVAL;
> +
> + pdata->gpio = of_get_named_gpio_flags(np, "gpios", 0, &flags);
> + if (pdata->gpio < 0)
> + return -EINVAL;
> +
> + if (flags & OF_GPIO_ACTIVE_LOW)
> + pdata->gpio_active_low = true;
> +
> + data->irq_wakeup = device_property_read_bool(&pdev->dev,
> + "wakeup-source");
> +
> + device_property_read_u32(&pdev->dev, "debounce-ms", &pdata->debounce);
> +
> + pdata->irq_flags = (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
> + | IRQF_ONESHOT);
> +
> + data->pdata = pdata;
> + return 0;
> +}
> +
> static int gpio_extcon_init(struct device *dev, struct gpio_extcon_data *data)
> {
> struct gpio_extcon_pdata *pdata = data->pdata;
> @@ -96,16 +134,20 @@ static int gpio_extcon_probe(struct platform_device *pdev)
> struct gpio_extcon_data *data;
> int ret;
>
> - if (!pdata)
> - return -EBUSY;
> - if (!pdata->irq_flags || pdata->extcon_id > EXTCON_NONE)
> - return -EINVAL;
> -
> - data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
> - GFP_KERNEL);
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> if (!data)
> return -ENOMEM;
> - data->pdata = pdata;
> +
> + if (!pdata) {
> + ret = gpio_extcon_parse_of(pdev, data);
> + if (ret < 0)
> + return ret;
> + } else {
> + data->pdata = pdata;
> + }
> +
> + if (!data->pdata->irq_flags || data->pdata->extcon_id == EXTCON_NONE)
> + return -EINVAL;
>
> /* Initialize the gpio */
> ret = gpio_extcon_init(&pdev->dev, data);
> @@ -113,7 +155,8 @@ static int gpio_extcon_probe(struct platform_device *pdev)
> return ret;
>
> /* Allocate the memory of extcon devie and register extcon device */
> - data->edev = devm_extcon_dev_allocate(&pdev->dev, &pdata->extcon_id);
> + data->edev = devm_extcon_dev_allocate(&pdev->dev,
> + &data->pdata->extcon_id);
> if (IS_ERR(data->edev)) {
> dev_err(&pdev->dev, "failed to allocate extcon device\n");
> return -ENOMEM;
> @@ -130,7 +173,8 @@ static int gpio_extcon_probe(struct platform_device *pdev)
> * is attached or detached.
> */
> ret = devm_request_any_context_irq(&pdev->dev, data->irq,
> - gpio_irq_handler, pdata->irq_flags,
> + gpio_irq_handler,
> + data->pdata->irq_flags,
> pdev->name, data);
> if (ret < 0)
> return ret;
> @@ -139,6 +183,8 @@ static int gpio_extcon_probe(struct platform_device *pdev)
> /* Perform initial detection */
> gpio_extcon_work(&data->work.work);
>
> + if (data->irq_wakeup)
> + device_init_wakeup(&pdev->dev, data->irq_wakeup);
> return 0;
> }
>
> @@ -152,11 +198,23 @@ static int gpio_extcon_remove(struct platform_device *pdev)
> }
>
> #ifdef CONFIG_PM_SLEEP
> +static int gpio_extcon_suspend(struct device *dev)
> +{
> + struct gpio_extcon_data *data = dev_get_drvdata(dev);
> +
> + if (data->irq_wakeup)
> + enable_irq_wake(data->irq);
> +
> + return 0;
> +}
> +
> static int gpio_extcon_resume(struct device *dev)
> {
> - struct gpio_extcon_data *data;
> + struct gpio_extcon_data *data = dev_get_drvdata(dev);
> +
> + if (data->irq_wakeup)
> + disable_irq_wake(data->irq);
>
> - data = dev_get_drvdata(dev);
> if (data->pdata->check_on_resume)
> queue_delayed_work(system_power_efficient_wq,
> &data->work, data->debounce_jiffies);
> @@ -165,7 +223,18 @@ static int gpio_extcon_resume(struct device *dev)
> }
> #endif
>
> -static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops, NULL, gpio_extcon_resume);
> +#if defined(CONFIG_OF)
> +static const struct of_device_id gpio_extcon_of_match[] = {
> + { .compatible = "extcon-gpio", },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, gpio_extcon_of_match);
> +#else
> +#define gpio_extcon_of_match NULL
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops,
> + gpio_extcon_suspend, gpio_extcon_resume);
>
> static struct platform_driver gpio_extcon_driver = {
> .probe = gpio_extcon_probe,
> @@ -173,11 +242,13 @@ static struct platform_driver gpio_extcon_driver = {
> .driver = {
> .name = "extcon-gpio",
> .pm = &gpio_extcon_pm_ops,
> + .of_match_table = gpio_extcon_of_match,
> },
> };
>
> module_platform_driver(gpio_extcon_driver);
>
> +MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
> MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
> MODULE_DESCRIPTION("GPIO extcon driver");
> MODULE_LICENSE("GPL");
> diff --git a/include/dt-bindings/extcon/extcon.h b/include/dt-bindings/extcon/extcon.h
> new file mode 100644
> index 0000000..dbba588
> --- /dev/null
> +++ b/include/dt-bindings/extcon/extcon.h
> @@ -0,0 +1,47 @@
> +/*
> + * This header provides constants for most extcon bindings.
> + *
> + * Most extcon bindings include the unique identification format.
> + * In most cases, the unique id format uses the standard values/macro
> + * defined in this header.
> + */
> +
> +#ifndef _DT_BINDINGS_EXTCON_EXTCON_H
> +#define _DT_BINDINGS_EXTCON_EXTCON_H
> +
> +/* USB external connector */
> +#define EXTCON_USB 1
> +#define EXTCON_USB_HOST 2
> +
> +/* Charging external connector */
> +#define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */
> +#define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */
> +#define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */
> +#define EXTCON_CHG_USB_ACA 8 /* Accessory Charger Adapter */
> +#define EXTCON_CHG_USB_FAST 9
> +#define EXTCON_CHG_USB_SLOW 10
> +
> +/* Jack external connector */
> +#define EXTCON_JACK_MICROPHONE 20
> +#define EXTCON_JACK_HEADPHONE 21
> +#define EXTCON_JACK_LINE_IN 22
> +#define EXTCON_JACK_LINE_OUT 23
> +#define EXTCON_JACK_VIDEO_IN 24
> +#define EXTCON_JACK_VIDEO_OUT 25
> +#define EXTCON_JACK_SPDIF_IN 26 /* Sony Philips Digital InterFace */
> +#define EXTCON_JACK_SPDIF_OUT 27
> +
> +/* Display external connector */
> +#define EXTCON_DISP_HDMI 40 /* High-Definition Multimedia Interface */
> +#define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link */
> +#define EXTCON_DISP_DVI 42 /* Digital Visual Interface */
> +#define EXTCON_DISP_VGA 43 /* Video Graphics Array */
> +
> +/* Miscellaneous external connector */
> +#define EXTCON_DOCK 60
> +#define EXTCON_JIG 61
> +#define EXTCON_MECHANICAL 62
> +
> +#define EXTCON_NUM 63
> +
> +#endif /* _DT_BINDINGS_EXTCON_EXTCON_H */
> diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h
> index 7cacafb..f7e7673 100644
> --- a/include/linux/extcon/extcon-gpio.h
> +++ b/include/linux/extcon/extcon-gpio.h
> @@ -1,8 +1,8 @@
> /*
> * Single-state GPIO extcon driver based on extcon class
> *
> - * Copyright (C) 2012 Samsung Electronics
> - * Author: MyungJoo Ham <myungjoo.ham@samsung.com>
> + * Copyright (C) 2016 Chanwoo Choi <cw00.choi@samsung.com>, Samsung Electronics
> + * Copyright (C) 2012 MyungJoo Ham <myungjoo.ham@samsung.com>, Samsung Electronics
> *
> * based on switch class driver
> * Copyright (C) 2008 Google, Inc.
> @@ -35,10 +35,10 @@
> * while resuming from sleep.
> */
> struct gpio_extcon_pdata {
> - unsigned int extcon_id;
> + u32 extcon_id;
> unsigned gpio;
> bool gpio_active_low;
> - unsigned long debounce;
> + u32 debounce;
> unsigned long irq_flags;
>
> bool check_on_resume;
> --
> 2.1.4
>

\
 
 \ /
  Last update: 2016-05-26 15:41    [W:0.283 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site