lkml.org 
[lkml]   [2016]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] extcon: gpio: Add the support for Device tree bindings
Hi Venkat,

On 2016년 05월 27일 14:13, Venkat Reddy Talla wrote:
> Hi Choi,
>
> Sorry for changing author, will update author field with your name.
>
> Regarding Rob Herring comments, You had already replied.

Rob gave some comment which the compatible string of extcon-gpio.c should
include the type of external connector. I replied about it [1].
[1] https://lkml.org/lkml/2016/5/31/109

>
> I felt separate compatible for each external connector is not required,
> as client driver can detect the type of external cable(sdp,dcp, microphone) on receiving notification from extcon provider,

You're right about the operation point of view.
But, As Rob gave some comment, The device-tree should include the device information
instead of driver information. The 'extcon-gpio' compatible mean the only driver
without h/w information.

I think that there is more discussion how to
decide the compatible name of extcon-gpio.c driver.

> I have also added more description for wakeup-source.

OK.

>
> Do you see any other changes required on top of v4 patch?

Regards,
Chanwoo Choi

>
> Regards,
> Venkat
>
>> -----Original Message-----
>> From: Chanwoo Choi [mailto:cwchoi00@gmail.com]
>> Sent: Thursday, May 26, 2016 6:52 PM
>> To: Venkat Reddy Talla
>> Cc: MyungJoo Ham; Rob Herring; Pawel Moll; Mark Rutland; Ian Campbell;
>> devicetree; Kumar Gala; linux-kernel; Laxman Dewangan
>> Subject: Re: [PATCH v4] extcon: gpio: Add the support for Device tree
>> bindings
>>
>> Hi Venkat,
>>
>> There is some miscommunication. On previous my reply, I don't mean that
>> the author of the patch[1] is changed from me to you.
>>
>> I'd like you to remain the original author(me) for the patch[1] without
>> changing the author.
>> [1] https://lkml.org/lkml/2015/10/21/8
>> - [PATCH v3] extcon: gpio: Add the support for Device tree bindings
>>
>> You can use the patch[1] as based patch and you can add new feature on
>> base patch[1]. Also, If you ok, you can modify the extccon-gpio.c driver as
>> Rob comment[2].
>>
>> But, Rob Herring gave me the some comment[2].
>> [2] https://lkml.org/lkml/2015/10/21/906
>>
>>
>> Thanks,
>> Chanwoo Choi
>>
>>
>> On Thu, May 26, 2016 at 8:47 PM, Venkat Reddy Talla
>> <vreddytalla@nvidia.com> wrote:
>>> Add the support for Device tree bindings of extcon-gpio driver.
>>> The extcon-gpio device tree node must include the both 'extcon-id' and
>>> 'gpios' property.
>>>
>>> For example:
>>> usb_cable: extcon-gpio-0 {
>>> compatible = "extcon-gpio";
>>> extcon-id = <EXTCON_USB>;
>>> gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
>>> }
>>> ta_cable: extcon-gpio-1 {
>>> compatible = "extcon-gpio";
>>> extcon-id = <EXTCON_CHG_USB_DCP>;
>>> gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
>>> debounce-ms = <50>; /* 50 millisecond */
>>> wakeup-source;
>>> }
>>> &dwc3_usb {
>>> extcon = <&usb_cable>;
>>> };
>>> &charger {
>>> extcon = <&ta_cable>;
>>> };
>>>
>>> Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
>>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>>> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
>>>
>>> ---
>>> changes from v3:
>>> - add description for wakeup-source in documentation
>>> - change dts property extcon-gpio name to gpios
>>> - use of_get_named_gpio_flags to get gpio number and flags Changes
>>> from v2:
>>> - Add the more description for 'extcon-id' property in documentation
>>> Changes from v1:
>>> - Create the include/dt-bindings/extcon/extcon.h including the
>>> identification of external connector. These definitions are used in dts file.
>>> - Fix error if CONFIG_OF is disabled.
>>> - Add signed-off tag by Myungjoo Ham
>>> ---
>>> ---
>>> .../devicetree/bindings/extcon/extcon-gpio.txt | 48 +++++++++
>>> drivers/extcon/extcon-gpio.c | 109 +++++++++++++++++----
>>> include/dt-bindings/extcon/extcon.h | 47 +++++++++
>>> include/linux/extcon/extcon-gpio.h | 8 +-
>>> 4 files changed, 189 insertions(+), 23 deletions(-) create mode
>>> 100644 Documentation/devicetree/bindings/extcon/extcon-gpio.txt
>>> create mode 100644 include/dt-bindings/extcon/extcon.h
>>>
>>> diff --git a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
>>> b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
>>> new file mode 100644
>>> index 0000000..81f7932
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
>>> @@ -0,0 +1,48 @@
>>> +GPIO Extcon device
>>> +
>>> +This is a virtual device used to generate the specific cable states
>>> +from the GPIO pin.
>>> +
>>> +Required properties:
>>> +- compatible: Must be "extcon-gpio".
>>> +- extcon-id: The extcon support the various type of external
>>> +connector to check
>>> + whether connector is attached or detached. The each external
>>> +connector has
>>> + the unique number to identify it. So this property includes the
>>> +unique number
>>> + which indicates the specific external connector. When external
>>> +connector is
>>> + attached or detached, GPIO pin detect the changed state. See
>>> +include/
>>> + dt-bindings/extcon/extcon.h which defines the unique number for
>>> +supported
>>> + external connector from extcon framework.
>>> +- gpios: GPIO pin to detect the external connector. See gpio binding.
>>> +
>>> +Optional properties:
>>> +- debounce-ms: the debounce dealy for GPIO pin in millisecond.
>>> +- wakeup-source: Boolean, extcon can wake-up the system from
>> suspend.
>>> + if gpio provided in extcon-gpio DT node is registered as interrupt,
>>> + then extcon can wake-up the system from suspend if wakeup-source
>>> +property
>>> + is available in DT node, if gpio registered as interrupt but
>>> +wakeup-source
>>> + is not available in DT node, then system wake-up due to extcon
>>> +events
>>> + not supported.
>>> +
>>> +Example: Examples of extcon-gpio node as listed below:
>>> +
>>> + usb_cable: extcon-gpio-0 {
>>> + compatible = "extcon-gpio";
>>> + extcon-id = <EXTCON_USB>;
>>> + extcon-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
>>> + }
>>> +
>>> + ta_cable: extcon-gpio-1 {
>>> + compatible = "extcon-gpio";
>>> + extcon-id = <EXTCON_CHG_USB_DCP>;
>>> + extcon-gpio = <&gpio3 2 GPIO_ACTIVE_LOW>;
>>> + debounce-ms = <50>; /* 50 millisecond */
>>> + wakeup-source;
>>> + }
>>> +
>>> + &dwc3_usb {
>>> + extcon = <&usb_cable>;
>>> + };
>>> +
>>> + &charger {
>>> + extcon = <&ta_cable>;
>>> + };
>>> diff --git a/drivers/extcon/extcon-gpio.c
>>> b/drivers/extcon/extcon-gpio.c index d023789..592f395 100644
>>> --- a/drivers/extcon/extcon-gpio.c
>>> +++ b/drivers/extcon/extcon-gpio.c
>>> @@ -1,11 +1,9 @@
>>> /*
>>> * extcon_gpio.c - Single-state GPIO extcon driver based on extcon class
>>> *
>>> - * Copyright (C) 2008 Google, Inc.
>>> - * Author: Mike Lockwood <lockwood@android.com>
>>> - *
>>> - * Modified by MyungJoo Ham <myungjoo.ham@samsung.com> to
>> support
>>> extcon
>>> - * (originally switch class is supported)
>>> + * Copyright (C) 2016 Chanwoo Choi <cw00.choi@samsung.com>,
>> Samsung
>>> + Electronics
>>> + * Copyright (C) 2012 MyungJoo Ham <myungjoo.ham@samsung.com>,
>>> + Samsung Electronics
>>> + * Copyright (C) 2008 Mike Lockwood <lockwood@android.com>, Google,
>> Inc.
>>> *
>>> * This software is licensed under the terms of the GNU General Public
>>> * License version 2, as published by the Free Software Foundation,
>>> and @@ -25,13 +23,17 @@ #include <linux/interrupt.h> #include
>>> <linux/kernel.h> #include <linux/module.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_gpio.h>
>>> #include <linux/platform_device.h>
>>> +#include <linux/property.h>
>>> #include <linux/slab.h>
>>> #include <linux/workqueue.h>
>>>
>>> struct gpio_extcon_data {
>>> struct extcon_dev *edev;
>>> int irq;
>>> + bool irq_wakeup;
>>> struct delayed_work work;
>>> unsigned long debounce_jiffies;
>>>
>>> @@ -49,7 +51,7 @@ static void gpio_extcon_work(struct work_struct
>> *work)
>>> state = gpiod_get_value_cansleep(data->id_gpiod);
>>> if (data->pdata->gpio_active_low)
>>> state = !state;
>>> - extcon_set_state(data->edev, state);
>>> + extcon_set_cable_state_(data->edev, data->pdata->extcon_id,
>>> + state);
>>> }
>>>
>>> static irqreturn_t gpio_irq_handler(int irq, void *dev_id) @@ -61,6
>>> +63,42 @@ static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
>>> return IRQ_HANDLED;
>>> }
>>>
>>> +static int gpio_extcon_parse_of(struct platform_device *pdev,
>>> + struct gpio_extcon_data *data) {
>>> + struct gpio_extcon_pdata *pdata;
>>> + struct device_node *np = pdev->dev.of_node;
>>> + enum of_gpio_flags flags;
>>> + int ret;
>>> +
>>> + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
>>> + if (!pdata)
>>> + return -ENOMEM;
>>> +
>>> + ret = device_property_read_u32(&pdev->dev, "extcon-id",
>>> + &pdata->extcon_id);
>>> + if (ret < 0)
>>> + return -EINVAL;
>>> +
>>> + pdata->gpio = of_get_named_gpio_flags(np, "gpios", 0, &flags);
>>> + if (pdata->gpio < 0)
>>> + return -EINVAL;
>>> +
>>> + if (flags & OF_GPIO_ACTIVE_LOW)
>>> + pdata->gpio_active_low = true;
>>> +
>>> + data->irq_wakeup = device_property_read_bool(&pdev->dev,
>>> + "wakeup-source");
>>> +
>>> + device_property_read_u32(&pdev->dev, "debounce-ms",
>>> + &pdata->debounce);
>>> +
>>> + pdata->irq_flags = (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
>>> + | IRQF_ONESHOT);
>>> +
>>> + data->pdata = pdata;
>>> + return 0;
>>> +}
>>> +
>>> static int gpio_extcon_init(struct device *dev, struct
>>> gpio_extcon_data *data) {
>>> struct gpio_extcon_pdata *pdata = data->pdata; @@ -96,16
>>> +134,20 @@ static int gpio_extcon_probe(struct platform_device *pdev)
>>> struct gpio_extcon_data *data;
>>> int ret;
>>>
>>> - if (!pdata)
>>> - return -EBUSY;
>>> - if (!pdata->irq_flags || pdata->extcon_id > EXTCON_NONE)
>>> - return -EINVAL;
>>> -
>>> - data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
>>> - GFP_KERNEL);
>>> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
>>> if (!data)
>>> return -ENOMEM;
>>> - data->pdata = pdata;
>>> +
>>> + if (!pdata) {
>>> + ret = gpio_extcon_parse_of(pdev, data);
>>> + if (ret < 0)
>>> + return ret;
>>> + } else {
>>> + data->pdata = pdata;
>>> + }
>>> +
>>> + if (!data->pdata->irq_flags || data->pdata->extcon_id ==
>> EXTCON_NONE)
>>> + return -EINVAL;
>>>
>>> /* Initialize the gpio */
>>> ret = gpio_extcon_init(&pdev->dev, data); @@ -113,7 +155,8 @@
>>> static int gpio_extcon_probe(struct platform_device *pdev)
>>> return ret;
>>>
>>> /* Allocate the memory of extcon devie and register extcon device */
>>> - data->edev = devm_extcon_dev_allocate(&pdev->dev, &pdata-
>>> extcon_id);
>>> + data->edev = devm_extcon_dev_allocate(&pdev->dev,
>>> +
>>> + &data->pdata->extcon_id);
>>> if (IS_ERR(data->edev)) {
>>> dev_err(&pdev->dev, "failed to allocate extcon device\n");
>>> return -ENOMEM;
>>> @@ -130,7 +173,8 @@ static int gpio_extcon_probe(struct
>> platform_device *pdev)
>>> * is attached or detached.
>>> */
>>> ret = devm_request_any_context_irq(&pdev->dev, data->irq,
>>> - gpio_irq_handler, pdata->irq_flags,
>>> + gpio_irq_handler,
>>> + data->pdata->irq_flags,
>>> pdev->name, data);
>>> if (ret < 0)
>>> return ret;
>>> @@ -139,6 +183,8 @@ static int gpio_extcon_probe(struct
>> platform_device *pdev)
>>> /* Perform initial detection */
>>> gpio_extcon_work(&data->work.work);
>>>
>>> + if (data->irq_wakeup)
>>> + device_init_wakeup(&pdev->dev, data->irq_wakeup);
>>> return 0;
>>> }
>>>
>>> @@ -152,11 +198,23 @@ static int gpio_extcon_remove(struct
>>> platform_device *pdev) }
>>>
>>> #ifdef CONFIG_PM_SLEEP
>>> +static int gpio_extcon_suspend(struct device *dev) {
>>> + struct gpio_extcon_data *data = dev_get_drvdata(dev);
>>> +
>>> + if (data->irq_wakeup)
>>> + enable_irq_wake(data->irq);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> static int gpio_extcon_resume(struct device *dev) {
>>> - struct gpio_extcon_data *data;
>>> + struct gpio_extcon_data *data = dev_get_drvdata(dev);
>>> +
>>> + if (data->irq_wakeup)
>>> + disable_irq_wake(data->irq);
>>>
>>> - data = dev_get_drvdata(dev);
>>> if (data->pdata->check_on_resume)
>>> queue_delayed_work(system_power_efficient_wq,
>>> &data->work, data->debounce_jiffies); @@
>>> -165,7 +223,18 @@ static int gpio_extcon_resume(struct device *dev) }
>>> #endif
>>>
>>> -static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops, NULL,
>>> gpio_extcon_resume);
>>> +#if defined(CONFIG_OF)
>>> +static const struct of_device_id gpio_extcon_of_match[] = {
>>> + { .compatible = "extcon-gpio", },
>>> + { /* sentinel */ },
>>> +};
>>> +MODULE_DEVICE_TABLE(of, gpio_extcon_of_match); #else
>>> +#define gpio_extcon_of_match NULL
>>> +#endif
>>> +
>>> +static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops,
>>> + gpio_extcon_suspend, gpio_extcon_resume);
>>>
>>> static struct platform_driver gpio_extcon_driver = {
>>> .probe = gpio_extcon_probe,
>>> @@ -173,11 +242,13 @@ static struct platform_driver gpio_extcon_driver =
>> {
>>> .driver = {
>>> .name = "extcon-gpio",
>>> .pm = &gpio_extcon_pm_ops,
>>> + .of_match_table = gpio_extcon_of_match,
>>> },
>>> };
>>>
>>> module_platform_driver(gpio_extcon_driver);
>>>
>>> +MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
>>> MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
>>> MODULE_DESCRIPTION("GPIO extcon driver"); MODULE_LICENSE("GPL");
>> diff
>>> --git a/include/dt-bindings/extcon/extcon.h
>>> b/include/dt-bindings/extcon/extcon.h
>>> new file mode 100644
>>> index 0000000..dbba588
>>> --- /dev/null
>>> +++ b/include/dt-bindings/extcon/extcon.h
>>> @@ -0,0 +1,47 @@
>>> +/*
>>> + * This header provides constants for most extcon bindings.
>>> + *
>>> + * Most extcon bindings include the unique identification format.
>>> + * In most cases, the unique id format uses the standard values/macro
>>> + * defined in this header.
>>> + */
>>> +
>>> +#ifndef _DT_BINDINGS_EXTCON_EXTCON_H
>>> +#define _DT_BINDINGS_EXTCON_EXTCON_H
>>> +
>>> +/* USB external connector */
>>> +#define EXTCON_USB 1
>>> +#define EXTCON_USB_HOST 2
>>> +
>>> +/* Charging external connector */
>>> +#define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */
>>> +#define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */
>>> +#define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */
>>> +#define EXTCON_CHG_USB_ACA 8 /* Accessory Charger Adapter */
>>> +#define EXTCON_CHG_USB_FAST 9
>>> +#define EXTCON_CHG_USB_SLOW 10
>>> +
>>> +/* Jack external connector */
>>> +#define EXTCON_JACK_MICROPHONE 20
>>> +#define EXTCON_JACK_HEADPHONE 21
>>> +#define EXTCON_JACK_LINE_IN 22
>>> +#define EXTCON_JACK_LINE_OUT 23
>>> +#define EXTCON_JACK_VIDEO_IN 24
>>> +#define EXTCON_JACK_VIDEO_OUT 25
>>> +#define EXTCON_JACK_SPDIF_IN 26 /* Sony Philips Digital InterFace
>> */
>>> +#define EXTCON_JACK_SPDIF_OUT 27
>>> +
>>> +/* Display external connector */
>>> +#define EXTCON_DISP_HDMI 40 /* High-Definition Multimedia
>> Interface */
>>> +#define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link
>> */
>>> +#define EXTCON_DISP_DVI 42 /* Digital Visual Interface */
>>> +#define EXTCON_DISP_VGA 43 /* Video Graphics Array */
>>> +
>>> +/* Miscellaneous external connector */
>>> +#define EXTCON_DOCK 60
>>> +#define EXTCON_JIG 61
>>> +#define EXTCON_MECHANICAL 62
>>> +
>>> +#define EXTCON_NUM 63
>>> +
>>> +#endif /* _DT_BINDINGS_EXTCON_EXTCON_H */
>>> diff --git a/include/linux/extcon/extcon-gpio.h
>>> b/include/linux/extcon/extcon-gpio.h
>>> index 7cacafb..f7e7673 100644
>>> --- a/include/linux/extcon/extcon-gpio.h
>>> +++ b/include/linux/extcon/extcon-gpio.h
>>> @@ -1,8 +1,8 @@
>>> /*
>>> * Single-state GPIO extcon driver based on extcon class
>>> *
>>> - * Copyright (C) 2012 Samsung Electronics
>>> - * Author: MyungJoo Ham <myungjoo.ham@samsung.com>
>>> + * Copyright (C) 2016 Chanwoo Choi <cw00.choi@samsung.com>,
>> Samsung
>>> + Electronics
>>> + * Copyright (C) 2012 MyungJoo Ham <myungjoo.ham@samsung.com>,
>>> + Samsung Electronics
>>> *
>>> * based on switch class driver
>>> * Copyright (C) 2008 Google, Inc.
>>> @@ -35,10 +35,10 @@
>>> * while resuming from sleep.
>>> */
>>> struct gpio_extcon_pdata {
>>> - unsigned int extcon_id;
>>> + u32 extcon_id;
>>> unsigned gpio;
>>> bool gpio_active_low;
>>> - unsigned long debounce;
>>> + u32 debounce;
>>> unsigned long irq_flags;
>>>
>>> bool check_on_resume;
>>> --
>>> 2.1.4
>>>

\
 
 \ /
  Last update: 2016-05-31 09:21    [W:0.106 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site