lkml.org 
[lkml]   [2016]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] ARM64: dts: amlogic: Enable Reset Controller on GXBB-based platforms
From
Date
On 05/20/2016 10:47 AM, Carlo Caione wrote:
> On 20/05/16 10:27, Neil Armstrong wrote:
>> Update DTSI file to add the reset controller node.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> index 832815d..2463e04 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> @@ -129,6 +129,12 @@
>> #size-cells = <2>;
>> ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
>>
>> + reset: reset-controller@4404 {
>> + compatible = "amlogic,meson-gxbb-reset";
>> + reg = <0x0 0x04404 0x0 0x20>;
>> + #reset-cells = <1>;
>> + };
>> +
>> uart_A: serial@84c0 {
>> compatible = "amlogic,meson-uart";
>> reg = <0x0 0x084c0 0x0 0x14>;
>
> Missing #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> ?
>
> Thanks,
>

Shouldn't we wait until the reset bindings are actually used in the dtsi ?
I'm quite sure kevin will post it with the Ethernet nodes.

Neil

\
 
 \ /
  Last update: 2016-05-20 11:01    [W:0.257 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site