lkml.org 
[lkml]   [2016]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] ARM64: dts: amlogic: Enable Reset Controller on GXBB-based platforms
On 20/05/16 10:53, Neil Armstrong wrote:
> On 05/20/2016 10:47 AM, Carlo Caione wrote:
> > On 20/05/16 10:27, Neil Armstrong wrote:
> >> Update DTSI file to add the reset controller node.
> >>
> >> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> >> ---
> >> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 6 ++++++
> >> 1 file changed, 6 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> >> index 832815d..2463e04 100644
> >> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> >> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> >> @@ -129,6 +129,12 @@
> >> #size-cells = <2>;
> >> ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
> >>
> >> + reset: reset-controller@4404 {
> >> + compatible = "amlogic,meson-gxbb-reset";
> >> + reg = <0x0 0x04404 0x0 0x20>;
> >> + #reset-cells = <1>;
> >> + };
> >> +
> >> uart_A: serial@84c0 {
> >> compatible = "amlogic,meson-uart";
> >> reg = <0x0 0x084c0 0x0 0x14>;
> >
> > Missing #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> ?
> >
> > Thanks,
> >
>
> Shouldn't we wait until the reset bindings are actually used in the dtsi ?
> I'm quite sure kevin will post it with the Ethernet nodes.

Why? The header file is related to the reset controller. Better add it
now with this patchset.

Cheers,

--
Carlo Caione

\
 
 \ /
  Last update: 2016-05-20 11:41    [W:0.077 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site