lkml.org 
[lkml]   [2016]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core
Date
The most recent release of AXS103 [v1.1] is proven to work
at 100 MHz in dual-core mode so this change uses mentioned feature.
For that we:
* Update axc003_idu.dtsi with mention of really-used CPU clock freq
* Remove clock override in AXS platform code for dual-core HW

Note we're still leaving a hack for clock "downgrade" on early boot
for quad-core hardware.

Also note this change will break functionality of AXS103 v1.0 hardware.
That means all users of AXS103 __must__ upgrade their boards with the
most recent firmware.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
---
arch/arc/boot/dts/axc003_idu.dtsi | 2 +-
arch/arc/plat-axs10x/axs10x.c | 2 --
2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 8955881d..ed1674b 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -28,7 +28,7 @@
core_clk: core_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <90000000>;
+ clock-frequency = <100000000>;
};

core_intc: archs-intc@cpu {
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index 9701c93..8654870 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -410,8 +410,6 @@ static void __init axs103_early_init(void)
unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F;
if (num_cores > 2)
freq = 50;
- else if (num_cores == 2)
- freq = 75;
#endif

switch (freq) {
--
2.5.5
\
 
 \ /
  Last update: 2016-05-16 12:21    [W:0.260 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site