lkml.org 
[lkml]   [2016]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 14/14] usb: host: xhci-plat: Add otg device to platform data
On Mon, May 02, 2016 at 03:18:57PM +0300, Roger Quadros wrote:
> Host controllers that are part of an OTG/dual-role instance
> need to somehow pass the OTG controller device information
> to the HCD core.
>
> We use platform data to pass the OTG controller device.
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> drivers/usb/host/xhci-plat.c | 35 ++++++++++++++++++++++++++++-------
> include/linux/usb/xhci_pdriver.h | 3 +++
> 2 files changed, 31 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index 5c15e9b..84ebe18 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -230,11 +230,20 @@ static int xhci_plat_probe(struct platform_device *pdev)
> goto put_usb3_hcd;
> }
>
> - ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
> + if (pdata && pdata->otg_dev)
> + ret = usb_otg_add_hcd(hcd, irq, IRQF_SHARED, pdata->otg_dev);
> + else
> + ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
> +
> if (ret)
> goto disable_usb_phy;
>
> - ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
> + if (pdata && pdata->otg_dev)
> + ret = usb_otg_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED,
> + pdata->otg_dev);
> + else
> + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
> +
> if (ret)
> goto dealloc_usb2_hcd;
>
> @@ -242,7 +251,10 @@ static int xhci_plat_probe(struct platform_device *pdev)
>
>
> dealloc_usb2_hcd:
> - usb_remove_hcd(hcd);
> + if (pdata && pdata->otg_dev)
> + usb_otg_remove_hcd(hcd);
> + else
> + usb_remove_hcd(hcd);
>
> disable_usb_phy:
> usb_phy_shutdown(hcd->usb_phy);
> @@ -260,16 +272,25 @@ put_hcd:
> return ret;
> }
>
> -static int xhci_plat_remove(struct platform_device *dev)
> +static int xhci_plat_remove(struct platform_device *pdev)
> {
> - struct usb_hcd *hcd = platform_get_drvdata(dev);
> + struct usb_hcd *hcd = platform_get_drvdata(pdev);
> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> struct clk *clk = xhci->clk;
> + struct usb_xhci_pdata *pdata = dev_get_platdata(&pdev->dev);
> +
> + if (pdata && pdata->otg_dev)
> + usb_otg_remove_hcd(xhci->shared_hcd);
> + else
> + usb_remove_hcd(xhci->shared_hcd);
>
> - usb_remove_hcd(xhci->shared_hcd);
> usb_phy_shutdown(hcd->usb_phy);
>
> - usb_remove_hcd(hcd);
> + if (pdata && pdata->otg_dev)
> + usb_otg_remove_hcd(hcd);
> + else
> + usb_remove_hcd(hcd);
> +
> usb_put_hcd(xhci->shared_hcd);
>
> if (!IS_ERR(clk))
> diff --git a/include/linux/usb/xhci_pdriver.h b/include/linux/usb/xhci_pdriver.h
> index 376654b..5c68b83 100644
> --- a/include/linux/usb/xhci_pdriver.h
> +++ b/include/linux/usb/xhci_pdriver.h
> @@ -18,10 +18,13 @@
> *
> * @usb3_lpm_capable: determines if this xhci platform supports USB3
> * LPM capability
> + * @otg_dev: OTG controller device. Only requied if part of
> + * OTG/dual-role.
> *
> */
> struct usb_xhci_pdata {
> unsigned usb3_lpm_capable:1;
> + struct device *otg_dev;
> };
>
> #endif /* __USB_CORE_XHCI_PDRIVER_H */
> --
> 2.7.4
>

Reviewed-by: Peter Chen <peter.chen@nxp.com>

--

Best Regards,
Peter Chen

\
 
 \ /
  Last update: 2016-05-11 11:21    [W:0.275 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site