lkml.org 
[lkml]   [2016]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 14/14] usb: host: xhci-plat: Add otg device to platform data
Date
Host controllers that are part of an OTG/dual-role instance
need to somehow pass the OTG controller device information
to the HCD core.

We use platform data to pass the OTG controller device.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/usb/host/xhci-plat.c | 35 ++++++++++++++++++++++++++++-------
include/linux/usb/xhci_pdriver.h | 3 +++
2 files changed, 31 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 5c15e9b..84ebe18 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -230,11 +230,20 @@ static int xhci_plat_probe(struct platform_device *pdev)
goto put_usb3_hcd;
}

- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (pdata && pdata->otg_dev)
+ ret = usb_otg_add_hcd(hcd, irq, IRQF_SHARED, pdata->otg_dev);
+ else
+ ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+
if (ret)
goto disable_usb_phy;

- ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
+ if (pdata && pdata->otg_dev)
+ ret = usb_otg_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED,
+ pdata->otg_dev);
+ else
+ ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
+
if (ret)
goto dealloc_usb2_hcd;

@@ -242,7 +251,10 @@ static int xhci_plat_probe(struct platform_device *pdev)


dealloc_usb2_hcd:
- usb_remove_hcd(hcd);
+ if (pdata && pdata->otg_dev)
+ usb_otg_remove_hcd(hcd);
+ else
+ usb_remove_hcd(hcd);

disable_usb_phy:
usb_phy_shutdown(hcd->usb_phy);
@@ -260,16 +272,25 @@ put_hcd:
return ret;
}

-static int xhci_plat_remove(struct platform_device *dev)
+static int xhci_plat_remove(struct platform_device *pdev)
{
- struct usb_hcd *hcd = platform_get_drvdata(dev);
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct clk *clk = xhci->clk;
+ struct usb_xhci_pdata *pdata = dev_get_platdata(&pdev->dev);
+
+ if (pdata && pdata->otg_dev)
+ usb_otg_remove_hcd(xhci->shared_hcd);
+ else
+ usb_remove_hcd(xhci->shared_hcd);

- usb_remove_hcd(xhci->shared_hcd);
usb_phy_shutdown(hcd->usb_phy);

- usb_remove_hcd(hcd);
+ if (pdata && pdata->otg_dev)
+ usb_otg_remove_hcd(hcd);
+ else
+ usb_remove_hcd(hcd);
+
usb_put_hcd(xhci->shared_hcd);

if (!IS_ERR(clk))
diff --git a/include/linux/usb/xhci_pdriver.h b/include/linux/usb/xhci_pdriver.h
index 376654b..5c68b83 100644
--- a/include/linux/usb/xhci_pdriver.h
+++ b/include/linux/usb/xhci_pdriver.h
@@ -18,10 +18,13 @@
*
* @usb3_lpm_capable: determines if this xhci platform supports USB3
* LPM capability
+ * @otg_dev: OTG controller device. Only requied if part of
+ * OTG/dual-role.
*
*/
struct usb_xhci_pdata {
unsigned usb3_lpm_capable:1;
+ struct device *otg_dev;
};

#endif /* __USB_CORE_XHCI_PDRIVER_H */
--
2.7.4
\
 
 \ /
  Last update: 2016-05-02 14:41    [W:0.240 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site