lkml.org 
[lkml]   [2016]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
Date
AVT2 was a prototype board of which about 5 were made, none of which
are in use anymore.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
---
arch/mips/jz4740/board-qi_lb60.c | 52 ++--------------------------------------
1 file changed, 2 insertions(+), 50 deletions(-)

diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 934b15b..4e3f9b7a 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -39,8 +39,6 @@

#include "clock.h"

-static bool is_avt2;
-
/* GPIOs */
#define QI_LB60_GPIO_SD_CD JZ_GPIO_PORTD(0)
#define QI_LB60_GPIO_SD_VCC_EN_N JZ_GPIO_PORTD(2)
@@ -367,43 +365,12 @@ static struct jz4740_mmc_platform_data qi_lb60_mmc_pdata = {
.power_active_low = 1,
};

-/* OHCI */
-static struct regulator_consumer_supply avt2_usb_regulator_consumer =
- REGULATOR_SUPPLY("vbus", "jz4740-ohci");
-
-static struct regulator_init_data avt2_usb_regulator_init_data = {
- .num_consumer_supplies = 1,
- .consumer_supplies = &avt2_usb_regulator_consumer,
- .constraints = {
- .name = "USB power",
- .min_uV = 5000000,
- .max_uV = 5000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct fixed_voltage_config avt2_usb_regulator_data = {
- .supply_name = "USB power",
- .microvolts = 5000000,
- .gpio = JZ_GPIO_PORTB(17),
- .init_data = &avt2_usb_regulator_init_data,
-};
-
-static struct platform_device avt2_usb_regulator_device = {
- .name = "reg-fixed-voltage",
- .id = -1,
- .dev = {
- .platform_data = &avt2_usb_regulator_data,
- }
-};
-
+/* beeper */
static struct pwm_lookup qi_lb60_pwm_lookup[] = {
PWM_LOOKUP("jz4740-pwm", 4, "pwm-beeper", NULL, 0,
PWM_POLARITY_NORMAL),
};

-/* beeper */
static struct platform_device qi_lb60_pwm_beeper = {
.name = "pwm-beeper",
.id = -1,
@@ -487,11 +454,6 @@ static int __init qi_lb60_init_platform_devices(void)
spi_register_board_info(qi_lb60_spi_board_info,
ARRAY_SIZE(qi_lb60_spi_board_info));

- if (is_avt2) {
- platform_device_register(&avt2_usb_regulator_device);
- platform_device_register(&jz4740_usb_ohci_device);
- }
-
pwm_add_table(qi_lb60_pwm_lookup, ARRAY_SIZE(qi_lb60_pwm_lookup));

return platform_add_devices(jz_platform_devices,
@@ -499,19 +461,9 @@ static int __init qi_lb60_init_platform_devices(void)

}

-static __init int board_avt2(char *str)
-{
- qi_lb60_mmc_pdata.card_detect_active_low = 1;
- is_avt2 = true;
-
- return 1;
-}
-__setup("avt2", board_avt2);
-
static int __init qi_lb60_board_setup(void)
{
- printk(KERN_INFO "Qi Hardware JZ4740 QI %s setup\n",
- is_avt2 ? "AVT2" : "LB60");
+ printk(KERN_INFO "Qi Hardware JZ4740 QI LB60 setup\n");

board_gpio_setup();

--
2.6.6
\
 
 \ /
  Last update: 2016-04-18 21:21    [W:0.220 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site