lkml.org 
[lkml]   [2016]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] net: phy: dp83848: Add support for TI TLK10x Ethernet PHYs
Date
The TI TLK10x Ethernet PHYs are similar in the interrupt relevant
registers and so are compatible with the DP83848x devices already
supported. Add these and re-order code to support additional PHYs.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
drivers/net/phy/dp83848.c | 89 ++++++++++++++++++++++++++++-------------------
1 file changed, 53 insertions(+), 36 deletions(-)

diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index 5e14e62..bc88259 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -1,7 +1,8 @@
/*
* Driver for the Texas Instruments DP83848 PHY
*
- * Copyright (C) 2015 Texas Instruments Inc.
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Andrew F. Davis <afd@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -16,11 +17,13 @@
#include <linux/module.h>
#include <linux/phy.h>

-#define DP83848_PHY_ID 0x20005c90
+#define DP83848C_PHY_ID 0x20005c90
+#define DP83848I_PHY_ID 0x20005ca0
+#define TLK10X_PHY_ID 0x2000a210

/* Registers */
-#define DP83848_MICR 0x11
-#define DP83848_MISR 0x12
+#define DP83848_MICR 0x11 /* MII Interrupt Control Register */
+#define DP83848_MISR 0x12 /* MII Interrupt Status Register */

/* MICR Register Fields */
#define DP83848_MICR_INT_OE BIT(0) /* Interrupt Output Enable */
@@ -36,6 +39,12 @@
#define DP83848_MISR_ED_INT_EN BIT(6) /* Energy detect */
#define DP83848_MISR_LQM_INT_EN BIT(7) /* Link Quality Monitor */

+#define DP83848_INT_EN_MASK \
+ (DP83848_MISR_ANC_INT_EN | \
+ DP83848_MISR_DUP_INT_EN | \
+ DP83848_MISR_SPD_INT_EN | \
+ DP83848_MISR_LINK_INT_EN)
+
static int dp83848_ack_interrupt(struct phy_device *phydev)
{
int err = phy_read(phydev, DP83848_MISR);
@@ -45,50 +54,58 @@ static int dp83848_ack_interrupt(struct phy_device *phydev)

static int dp83848_config_intr(struct phy_device *phydev)
{
- int err;
+ int control, ret;
+
+ control = phy_read(phydev, DP83848_MICR);
+ if (control < 0)
+ return control;

if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
- err = phy_write(phydev, DP83848_MICR,
- DP83848_MICR_INT_OE |
- DP83848_MICR_INTEN);
- if (err < 0)
- return err;
-
- return phy_write(phydev, DP83848_MISR,
- DP83848_MISR_ANC_INT_EN |
- DP83848_MISR_DUP_INT_EN |
- DP83848_MISR_SPD_INT_EN |
- DP83848_MISR_LINK_INT_EN);
+ control |= DP83848_MICR_INT_OE;
+ control |= DP83848_MICR_INTEN;
+
+ ret = phy_write(phydev, DP83848_MISR, DP83848_INT_EN_MASK);
+ if (ret < 0)
+ return ret;
+ } else {
+ control &= ~DP83848_MICR_INTEN;
}

- return phy_write(phydev, DP83848_MICR, 0x0);
+ return phy_write(phydev, DP83848_MICR, control);
}

static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
- { DP83848_PHY_ID, 0xfffffff0 },
+ { DP83848C_PHY_ID, 0xfffffff0 },
+ { DP83848I_PHY_ID, 0xfffffff0 },
+ { TLK10X_PHY_ID, 0xfffffff0 },
{ }
};
MODULE_DEVICE_TABLE(mdio, dp83848_tbl);

+#define DP83848_PHY_DRIVER(_id, _name) \
+ { \
+ .phy_id = _id, \
+ .phy_id_mask = 0xfffffff0, \
+ .name = _name, \
+ .features = PHY_BASIC_FEATURES, \
+ .flags = PHY_HAS_INTERRUPT, \
+ \
+ .soft_reset = genphy_soft_reset, \
+ .config_init = genphy_config_init, \
+ .suspend = genphy_suspend, \
+ .resume = genphy_resume, \
+ .config_aneg = genphy_config_aneg, \
+ .read_status = genphy_read_status, \
+ \
+ /* IRQ related */ \
+ .ack_interrupt = dp83848_ack_interrupt, \
+ .config_intr = dp83848_config_intr, \
+ }
+
static struct phy_driver dp83848_driver[] = {
- {
- .phy_id = DP83848_PHY_ID,
- .phy_id_mask = 0xfffffff0,
- .name = "TI DP83848",
- .features = PHY_BASIC_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
-
- .soft_reset = genphy_soft_reset,
- .config_init = genphy_config_init,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
-
- /* IRQ related */
- .ack_interrupt = dp83848_ack_interrupt,
- .config_intr = dp83848_config_intr,
- },
+ DP83848_PHY_DRIVER(DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY"),
+ DP83848_PHY_DRIVER(DP83848I_PHY_ID, "TI DP83848I 10/100 Mbps PHY"),
+ DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY"),
};
module_phy_driver(dp83848_driver);

--
2.7.0
\
 
 \ /
  Last update: 2016-02-06 00:41    [W:0.135 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site