lkml.org 
[lkml]   [2016]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] pci: add kernel config option for disabling common PCI quirks
Date
From: Gabor Juhos <juhosg@openwrt.org>

These quirks do not effect small small plastic routers. These routers tend
to have very little flash space. This patch adds a new option that allows
us to build a kernel without including the common quirks, thus saving us
valuable flash space.

When building an image for a MIPS/Ralink router with this option enabled
it will reduce the size of an uncompressed uImage by 12KB.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
Hi Bjorn,

This patch has been lingering inside the OpenWrt for some years. I am not
sure if this is the best way to remove the quirks from the build. Let me
know if you prefer a different way of solving this.

John

drivers/pci/Kconfig | 10 ++++++++++
drivers/pci/quirks.c | 6 ++++++
2 files changed, 16 insertions(+)

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 6555eb7..967bcd5 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -71,6 +71,16 @@ config XEN_PCIDEV_FRONTEND
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains.

+config PCI_DISABLE_COMMON_QUIRKS
+ bool "PCI disable common quirks"
+ depends on PCI
+ default n
+ help
+ Say Y here if you do not wish to include the common quirks inside
+ your kernel This is usefull for devices with scarce memory.
+
+ If you don't know what to do here, say N.
+
config HT_IRQ
bool "Interrupts on hypertransport devices"
default y
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index c232729..afe181e 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -41,6 +41,7 @@ static void quirk_mmio_always_on(struct pci_dev *dev)
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);

+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
@@ -3015,6 +3016,7 @@ static void quirk_intel_mc_errata(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);

+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */

/*
* Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To
@@ -3071,6 +3073,8 @@ static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime,
}
}

+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+
/*
* Some BIOS implementations leave the Intel GPU interrupts enabled,
* even though no one is handling them (f.e. i915 driver is never loaded).
@@ -3105,6 +3109,8 @@ static void disable_igfx_irq(struct pci_dev *dev)
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);

+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+
/*
* PCI devices which are on Intel chips can skip the 10ms delay
* before entering D3 mode.
--
1.7.10.4
\
 
 \ /
  Last update: 2016-12-21 08:54    [W:1.301 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site