lkml.org 
[lkml]   [2016]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] thermal/powerclamp: add back module device table
Date
Commit 3105f234e0aba43e44e277c20f9b32ee8add43d4 replaced module
cpu id table with a cpu feature check, which is logically correct.
But we need the module device table to allow module auto loading.
---
drivers/thermal/intel_powerclamp.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c
index f0bad48..c82b41f 100644
--- a/drivers/thermal/intel_powerclamp.c
+++ b/drivers/thermal/intel_powerclamp.c
@@ -694,9 +694,16 @@ static int powerclamp_set_cur_state(struct thermal_cooling_device *cdev,
.set_cur_state = powerclamp_set_cur_state,
};

+static const struct x86_cpu_id __initconst intel_powerclamp_ids[] = {
+ { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_MWAIT },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids);
+
static int __init powerclamp_probe(void)
{
- if (!boot_cpu_has(X86_FEATURE_MWAIT)) {
+
+ if (!x86_match_cpu(intel_powerclamp_ids)) {
pr_err("CPU does not support MWAIT");
return -ENODEV;
}
--
1.9.1
\
 
 \ /
  Last update: 2016-11-09 16:06    [W:0.045 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site