[lkml]   [2016]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH] igb: Explicitly select page 0 at initialization
The functions igb_read_phy_reg_gs40g/igb_write_phy_reg_gs40g (which were
removed in 2a3cdea) explicitly selected the required page at every phy_reg
access. Currently, igb_get_phy_id_82575 relays on the fact that page 0 is
already selected. The assumption is not fulfilled for my Lex 3I380CW
motherboard with integrated dual i211 based gigabit ethernet. This leads to igb
initialization failure and network interfaces are not working:

igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igb: probe of 0000:01:00.0 failed with error -2
igb: probe of 0000:02:00.0 failed with error -2

In order to fix it, we explicitly select page 0 before first access to phy

See also:
See also:

Fixes: 2a3cdea ("igb: Remove GS40G specific defines/functions")
Cc: <> # 4.5+
Signed-off-by: Matwey V. Kornilov <>
drivers/net/ethernet/intel/igb/e1000_82575.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index a61447f..1264a36 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -246,6 +246,7 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)

/* Set phy->phy_addr and phy->id. */
+ igb_write_phy_reg_82580(hw, I347AT4_PAGE_SELECT, 0);
ret_val = igb_get_phy_id_82575(hw);
if (ret_val)
return ret_val;
 \ /
  Last update: 2016-11-24 11:33    [W:0.031 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site