lkml.org 
[lkml]   [2015]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 6/8] scsi: ufs: make the UFS variant a platform device
On Sun, Aug 30, 2015 at 3:43 AM,  <ygardi@codeaurora.org> wrote:
>> On Sun, Aug 23, 2015 at 8:09 AM, Yaniv Gardi <ygardi@codeaurora.org>
>> wrote:
>>> This change turns the UFS variant (SCSI_UFS_QCOM) into a UFS
>>> a platform device.
>>> In order to do so a few additional changes are required:
>>> 1. The ufshcd-pltfrm is no longer serves as a platform device.
>>> Now it only serves as a group of platform APIs such as PM APIs
>>> (runtime suspend/resume, system suspend/resume etc), parsers of
>>> clocks, regulators and pm_levels from DT.
>>> 2. What used to be the old platform "probe" is now "only"
>>> a pltfrm_init() routine, that does exactly the same, but only
>>> being called by the new probe function of the UFS variant.
>>>
>>> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
>>>
>>> ---
>>> .../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 2 +-
>>> drivers/scsi/ufs/ufs-qcom.c | 78
>>> +++++++++++++++++-
>>> drivers/scsi/ufs/ufshcd-pltfrm.c | 92
>>> ++++++----------------
>>> drivers/scsi/ufs/ufshcd-pltfrm.h | 41 ++++++++++
>>> drivers/scsi/ufs/ufshcd.c | 10 +++
>>> drivers/scsi/ufs/ufshcd.h | 1 +
>>> 6 files changed, 152 insertions(+), 72 deletions(-)
>>> create mode 100644 drivers/scsi/ufs/ufshcd-pltfrm.h
>>>
>>> diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>>> b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>>> index 5357919..b39e765 100644
>>> --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>>> +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>>> @@ -4,7 +4,7 @@ UFSHC nodes are defined to describe on-chip UFS host
>>> controllers.
>>> Each UFS controller instance should have its own node.
>>>
>>> Required properties:
>>> -- compatible : compatible list, contains "jedec,ufs-1.1"
>>> +- compatible : compatible list, contains "jedec,ufs-1.1" or
>>> "qcom,ufshc"
>>
>> Replying again as I inadvertently dropped everyone.
>>
>> This should also have a more specific compatible string with the SOC
>> name/number in it. It may be "the same in all SOCs", but there is
>> always the possibility for bugs/limitations to be found that are
>> specific to an SOC even if all RTL versions are identical (e.g.
>> different max clock speeds). It is about making the dtb future proof,
>> not about what exactly you need today. You can keep qcom,ufshc for
>> driver matching if you want.
>
> I see your point.
> I just would like to make sure, syntactically speaking, if what you mean
> should look like:
>
> compatible : compatible list, contains "jedec,ufs-1.1" or
> "qcom,ufshc" for msm8994, msm8996 SOCs.

No, you need actual compatible strings:

contains one of:
"jedec,ufs-1.1"
"qcom,msm8994-ufshc" or "qcom,msm8996-ufshc" followed by "qcom,ufshc"

Really, we should probably never had allowed "jedec,ufs-1.1" by itself.

>>> - interrupts : <interrupt mapping for UFS host controller IRQ>
>>> - reg : <registers mapping>
>>
>> What about phy properties? No Unipro PHY block that requires setup?
>>
>
> yes, i will add another documentation file for it.

And you need the "phy" property here with the phandle to the phy node.

Rob


\
 
 \ /
  Last update: 2015-08-30 15:41    [W:0.124 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site