lkml.org 
[lkml]   [2015]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 6/8] scsi: ufs: make the UFS variant a platform device
From
> On Sun, Aug 30, 2015 at 3:43 AM,  <ygardi@codeaurora.org> wrote:
>>> On Sun, Aug 23, 2015 at 8:09 AM, Yaniv Gardi <ygardi@codeaurora.org>
>>> wrote:
>>>> This change turns the UFS variant (SCSI_UFS_QCOM) into a UFS
>>>> a platform device.
>>>> In order to do so a few additional changes are required:
>>>> 1. The ufshcd-pltfrm is no longer serves as a platform device.
>>>> Now it only serves as a group of platform APIs such as PM APIs
>>>> (runtime suspend/resume, system suspend/resume etc), parsers of
>>>> clocks, regulators and pm_levels from DT.
>>>> 2. What used to be the old platform "probe" is now "only"
>>>> a pltfrm_init() routine, that does exactly the same, but only
>>>> being called by the new probe function of the UFS variant.
>>>>
>>>> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
>>>>
>>>> ---
>>>> .../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 2 +-
>>>> drivers/scsi/ufs/ufs-qcom.c | 78
>>>> +++++++++++++++++-
>>>> drivers/scsi/ufs/ufshcd-pltfrm.c | 92
>>>> ++++++----------------
>>>> drivers/scsi/ufs/ufshcd-pltfrm.h | 41 ++++++++++
>>>> drivers/scsi/ufs/ufshcd.c | 10 +++
>>>> drivers/scsi/ufs/ufshcd.h | 1 +
>>>> 6 files changed, 152 insertions(+), 72 deletions(-)
>>>> create mode 100644 drivers/scsi/ufs/ufshcd-pltfrm.h
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>>>> b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>>>> index 5357919..b39e765 100644
>>>> --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>>>> +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>>>> @@ -4,7 +4,7 @@ UFSHC nodes are defined to describe on-chip UFS host
>>>> controllers.
>>>> Each UFS controller instance should have its own node.
>>>>
>>>> Required properties:
>>>> -- compatible : compatible list, contains "jedec,ufs-1.1"
>>>> +- compatible : compatible list, contains "jedec,ufs-1.1" or
>>>> "qcom,ufshc"
>>>
>>> Replying again as I inadvertently dropped everyone.
>>>
>>> This should also have a more specific compatible string with the SOC
>>> name/number in it. It may be "the same in all SOCs", but there is
>>> always the possibility for bugs/limitations to be found that are
>>> specific to an SOC even if all RTL versions are identical (e.g.
>>> different max clock speeds). It is about making the dtb future proof,
>>> not about what exactly you need today. You can keep qcom,ufshc for
>>> driver matching if you want.
>>
>> I see your point.
>> I just would like to make sure, syntactically speaking, if what you mean
>> should look like:
>>
>> compatible : compatible list, contains "jedec,ufs-1.1" or
>> "qcom,ufshc" for msm8994, msm8996 SOCs.
>
> No, you need actual compatible strings:
>
> contains one of:
> "jedec,ufs-1.1"
> "qcom,msm8994-ufshc" or "qcom,msm8996-ufshc" followed by "qcom,ufshc"
>
> Really, we should probably never had allowed "jedec,ufs-1.1" by itself.
>
>>>> - interrupts : <interrupt mapping for UFS host controller IRQ>
>>>> - reg : <registers mapping>
>>>
>>> What about phy properties? No Unipro PHY block that requires setup?
>>>
>>
>> yes, i will add another documentation file for it.
>
> And you need the "phy" property here with the phandle to the phy node.
>

The "phy" properties will be updated in V8 i'm about to uploade

> Rob
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>




\
 
 \ /
  Last update: 2015-10-25 10:41    [W:0.062 / U:2.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site