lkml.org 
[lkml]   [2015]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch v3] iio: tsl4531: fix error handling in tsl4531_check_id()
The tsl4531_check_id() function returned 1 on "found" and 0 on "not
found" and negative error codes on failure. This was non-standard and
bug prone. The caller treated all non-zero values including error codes
as "found".

This patch fixes it by changing the tsl4531_check_id() to return zero on
success or a negative error code, and updates the caller.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
v3: slightly different fix again
v2: different fix

diff --git a/drivers/iio/light/tsl4531.c b/drivers/iio/light/tsl4531.c
index 2697918..cf94ec7 100644
--- a/drivers/iio/light/tsl4531.c
+++ b/drivers/iio/light/tsl4531.c
@@ -158,9 +158,9 @@ static int tsl4531_check_id(struct i2c_client *client)
case TSL45313_ID:
case TSL45315_ID:
case TSL45317_ID:
- return 1;
- default:
return 0;
+ default:
+ return -ENODEV;
}
}

@@ -180,9 +180,10 @@ static int tsl4531_probe(struct i2c_client *client,
data->client = client;
mutex_init(&data->lock);

- if (!tsl4531_check_id(client)) {
+ ret = tsl4531_check_id(client);
+ if (ret) {
dev_err(&client->dev, "no TSL4531 sensor\n");
- return -ENODEV;
+ return ret;
}

ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONTROL,

\
 
 \ /
  Last update: 2015-08-18 11:41    [W:0.253 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site